Skip to content

Add Traverse Technologies Ten64 board DTS

Mathew McBride linux-arm-kernel linux-devicetree 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest5 patches 0 repliesNew
  2. v25 patches 3 repliesSuperseded
  3. v15 patches 4 repliesSuperseded

Changes in v3 from the cover letter

- Move flash (NOR and NAND) partitions under a partitions node
- Fix minor spelling error in fsl.yaml (s/bassed/based/g)

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5arm64: dts: ls1088a: add internal PCS for DPMAC1 nodearch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi+13 -00 replies
2/5arm64: dts: ls1088a: add missing PMU nodearch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi+5 -00 replies
3/5dt-bindings: vendor-prefixes: add Traverse TechnologiesDocumentation/devicetree/bindings/vendor-prefixes.yaml+2 -00 replies
4/5dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) boardDocumentation/devicetree/bindings/arm/fsl.yaml+6 -00 replies
5/5arm64: dts: add device tree for Traverse Ten64 (LS1088A)arch/arm64/boot/dts/freescale/Makefile arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts+390 -00 replies

Reviews trailers per patch

4 of 5 patches have a Reviewed-by or Acked-by.

PatchIoana CiorneiRob Herring
1/5R-b
2/5
3/5A-b
4/5A-b
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/5] Add Traverse Technologies Ten64 board DTS

The Traverse Technologies Ten64 board is a networking-oriented Mini-ITX form factor appliance using the NXP LS1088A SoC.

This patch series adds a basic device tree (fsl-ls1088a-ten64.dts) for the board. At the moment only hardware features supported (or soon to be supported) by mainline kernels are described.

In the course of verifying the DTS on recent kernels, it was found that some LS1088A features were not described in fsl-ls1088a.dtsi. The first two patches add them.

The device tree includes a reference to the Epson RX-8035 RTC which depends on this patch series:
"rtc: Implement support for EPSON RX-8035", reviewed but not yet in the Linus tree.
https://lore.kernel.org/linux-rtc/[email protected]/T/#t

Changes since v2:
- Move flash (NOR and NAND) partitions under a partitions node
- Fix minor spelling error in fsl.yaml (s/bassed/based/g)

Changes since v1:
- Pick up Reviewed-By tags for PCS and MAC/PHY related parts
- Use constants for describing interrupts for the PMU
- Use the Cortex-A53 specific PMU compatible instead of the armv8-pmu3 generic
- Fix formatting issues for the board DTS (ordering, newlines, node names)

Mathew McBride (5):
arm64: dts: ls1088a: add internal PCS for DPMAC1 node
arm64: dts: ls1088a: add missing PMU node
dt-bindings: vendor-prefixes: add Traverse Technologies
dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
arm64: dts: add device tree for Traverse Ten64 (LS1088A)

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/fsl-ls1088a-ten64.dts  | 389 ++++++++++++++++++
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  18 +
 5 files changed, 416 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
Signature · 1 line
2.30.1