Skip to content

Convert the Dreamplug Ethernet and SATA to Driver Model.

Tony Dinh u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 10 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm: kirkwood: Dreamplug: Add DM Ethernet and DM SATA configsconfigs/dreamplug_defconfig+4 -01 reply
2/3arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device treeboard/Marvell/dreamplug/dreamplug.c+48 -147 replies
3/3arm: kirkwood: Dreamplug: Add DM SATA and remove IDE configsinclude/configs/dreamplug.h+10 -21 reply

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchStefan Roese
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] Convert the Dreamplug Ethernet and SATA to Driver Model.

- Enable DM SATA, removed IDE driver, add SATA MV driver.
- Use Ethernet PHY names from device tree.
- Replace the old Ethernet PHY addr lookup with a device tree parsing lookup function.

Tony Dinh (3):
arm: kirkwood: Dreamplug: Add DM Ethernet and DM SATA configs
arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from
device tree
arm: kirkwood: Dreamplug: Add DM SATA and remove IDE configs

 board/Marvell/dreamplug/dreamplug.c | 62 ++++++++++++++++++++++-------
 configs/dreamplug_defconfig         |  4 ++
 include/configs/dreamplug.h         | 12 +++++-
 3 files changed, 62 insertions(+), 16 deletions(-)
Signature · 1 line
2.20.1