Skip to content

Cleanup MAIN R5F boot from R5 SPL

Suman Anna u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5arm: mach-k3: j721e: Move booting of Main R5FSS Core0 to A72 U-Bootarch/arm/mach-k3/j721e_init.c include/configs/j721e_evm.h+6 -10 replies
2/5arm: mach-k3: j721e: Cleanup MAIN R5 boot code from R5 SPLarch/arm/mach-k3/j721e_init.c include/configs/j721e_evm.h+0 -420 replies
3/5arm: mach-k3: Cleanup common start_non_linux_remote_cores()arch/arm/mach-k3/common.c arch/arm/mach-k3/common.h+0 -60 replies
4/5arm: dts: k3-j721e-r5: Remove MAIN R5FSS0 cluster from SPLarch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi arch/arm/dts/k3-j721e-r5-common-proc-board.dts+0 -160 replies
5/5configs: j721e_evm_r5: Disable K3 R5F remoteprocconfigs/j721e_evm_r5_defconfig+0 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] Cleanup MAIN R5F boot from R5 SPL

Hi Lokesh,

The following series cleans up the code related to booting of Main R5FSS0 Core0 from R5 SPL, and moves it to A72 U-Boot on J721E SoCs. This is no longer supported after the R5 SPL re-architecture that splits the System Firmware functionality onto two separate processors. This functionality has been merged post v2021.07 tag towards v2021.10-rc1. The Main R5FSS0 Core0 is already being booted on A72 U-Boot on J7200 SoCs, the other SoC family that follows this split system firmware architecture.

Following is the patch summary:
- Patch 1 skips the booting of Main R5FSS in R5 SPL and moves it to be supported on A72 U-Boot.
- Patches 2 and 3 cleanup the start_non_linux_remote_cores() code
- Patch 4 removes the Main R5F nodes from R5 SPL dtb
- Patch 5 disables the K3 R5F remoteproc driver to be built in R5 SPL (tiboot3.bin size reduces by about 5K).

regards
Suman

Suman Anna (5):
arm: mach-k3: j721e: Move booting of Main R5FSS Core0 to A72 U-Boot
arm: mach-k3: j721e: Cleanup MAIN R5 boot code from R5 SPL
arm: mach-k3: Cleanup common start_non_linux_remote_cores()
arm: dts: k3-j721e-r5: Remove MAIN R5FSS0 cluster from SPL
configs: j721e_evm_r5: Disable K3 R5F remoteproc

 .../k3-j721e-r5-common-proc-board-u-boot.dtsi | 14 --------
 .../arm/dts/k3-j721e-r5-common-proc-board.dts |  2 --
 arch/arm/mach-k3/common.c                     |  5 ---
 arch/arm/mach-k3/common.h                     |  1 -
 arch/arm/mach-k3/j721e_init.c                 | 36 -------------------
 configs/j721e_evm_r5_defconfig                |  1 -
 include/configs/j721e_evm.h                   |  3 +-
 7 files changed, 1 insertion(+), 61 deletions(-)
Signature · 1 line
2.32.0