Skip to content

arm: kirkwood: Convert the GoFlex Home board Ethernet and SATA to Driver Model.

Tony Dinh u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configsconfigs/goflexhome_defconfig+4 -11 reply
2/3arm: kirkwood: GoFlex Home: Add DM SATA configsinclude/configs/goflexhome.h+6 -01 reply
3/3arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device treeboard/Seagate/goflexhome/goflexhome.c+45 -121 reply

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchStefan Roese
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] arm: kirkwood: Convert the GoFlex Home board Ethernet and SATA to Driver Model.

- Enable DM SATA and SATA MV driver
- Enable DM Ethernet.
- Use Ethernet PHY names from device tree.
- Replace the old Ethernet PHY addr lookup with a device tree parsing lookup function.

Tony Dinh (3):
arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM
SATA configs
arm: kirkwood: GoFlex Home: Add DM SATA configs
arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from
device tree

 board/Seagate/goflexhome/goflexhome.c | 57 +++++++++++++++++++++------
 configs/goflexhome_defconfig          |  5 ++-
 include/configs/goflexhome.h          |  6 +++
 3 files changed, 55 insertions(+), 13 deletions(-)
Signature · 1 line
2.20.1