Skip to content

Use device tree to get DRAM for sama5d27_som1_ek/sama5d2_xplained

Clément Léger u-boot 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest5 patches 1 replyIn review
  2. v15 patches 2 repliesSuperseded

Changes in v2 from the cover letter

- Move memory node from sama5d2.dtsi to at91-sama5d2_xplained.dts

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5board: sama5d27_som1_ek: Get dram size and base from device treeboard/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c+8 -40 replies
2/5board: sama5d27_som1_ek: Modify load addressesinclude/configs/sama5d27_som1_ek.h+4 -80 replies
3/5ARM: dts: at91: sama5d2_xplained: Add memory node in devicetreearch/arm/dts/at91-sama5d2_xplained.dts+4 -00 replies
4/5board: sama5d2_xplained: Get dram size and base from device treeboard/atmel/sama5d2_xplained/sama5d2_xplained.c+7 -40 replies
5/5board: sama5d2_xplained: Modify load addressesinclude/configs/sama5d2_xplained.h+10 -140 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/5] Use device tree to get DRAM for sama5d27_som1_ek/sama5d2_xplained

Loading U-Boot after OP-TEE requires to move the base address of the DRAM and reduce its size. Indeed, OP-TEE will be loaded at start of DRAM for these platforms and this DRAM will be secured and thus not accessible to U-Boot.

Currently, addresses are hardcoded in board configs. This series adds memory property when missing to existing device tree and modify init code to fetch DRAM size from devicetree. This will allow to modify only the device tree to reduce DRAM when needed.

Memory addresses have been chosen to have a 32Mb hole at the start of DRAM which allows to put OP-TEE and necessary exchange memory zones.

Changes in v2:
- Move memory node from sama5d2.dtsi to at91-sama5d2_xplained.dts

Clément Léger (5):
board: sama5d27_som1_ek: Get dram size and base from device tree
board: sama5d27_som1_ek: Modify load addresses
ARM: dts: at91: sama5d2_xplained: Add memory node in devicetree
board: sama5d2_xplained: Get dram size and base from device tree
board: sama5d2_xplained: Modify load addresses

 arch/arm/dts/at91-sama5d2_xplained.dts        |  4 ++++
 .../atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 12 ++++++----
 .../atmel/sama5d2_xplained/sama5d2_xplained.c | 11 +++++----
 include/configs/sama5d27_som1_ek.h            | 12 ++++------
 include/configs/sama5d2_xplained.h            | 24 ++++++++-----------
 5 files changed, 33 insertions(+), 30 deletions(-)
Signature · 1 line
2.32.0