Skip to content

drivers: mmc: Add wait_dat0 support for more devices

[email protected] u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2drivers: mmc: Add wait_dat0 support for Freescale eSDHC driverdrivers/mmc/fsl_esdhc.c+16 -01 reply
2/2drivers: mmc: Add wait_dat0 support for sdhci driverdrivers/mmc/sdhci.c include/sdhci.h+22 -01 reply

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchJaehoon Chung
1/2R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] drivers: mmc: Add wait_dat0 support for more devices

From: Stephen Carlson <[email protected]>

This patch adds eMMC driver support for polling the DAT0 data connection on the Freescale LX devices and SDHCI compatible devices.

Polling until the card reports it is no longer busy increases eMMC driver performance over the default behavior, which is to wait for the worst case timeout specified by the card upon each mmc_switch operation.

This change has been tested on the Broadcom NS3 series (SDHCI) and LX2160A series (Freescale/NXP eSDHC). U-Boot boot time savings depend on the eMMC memory used, but can range from 100 to 500 ms or more.

Stephen Carlson (2):
drivers: mmc: Add wait_dat0 support for Freescale eSDHC driver
drivers: mmc: Add wait_dat0 support for sdhci driver

 drivers/mmc/fsl_esdhc.c | 16 ++++++++++++++++
 drivers/mmc/sdhci.c     | 20 ++++++++++++++++++++
 include/sdhci.h         |  2 ++
 3 files changed, 38 insertions(+)
Signature · 1 line
2.17.1