Skip to content

mptfusion: Fixes for SCSI EH rework

Hannes Reinecke linux-scsi 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3mptfusion: correct definitions for mptscsih_dev_reset()drivers/message/fusion/mptscsih.c drivers/message/fusion/mptscsih.h+55 -10 replies
2/3mptfc: use fc_block_rport() instead of open-coding itdrivers/message/fusion/mptfc.c+41 -510 replies
3/3mptfc: iterate over all rports during bus resetdrivers/message/fusion/mptfc.c+8 -40 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] mptfusion: Fixes for SCSI EH rework

Hi all,

with the SCSI EH rework the scsi_cmnd argument for the SCSI EH callbacks is going away, so we need to fixup the drivers to work without it.

This patchset modifies the mptfusion driver to not rely on a specific command for the SCSI EH callbacks.

As usual, comments and reviews are welcome.

Hannes Reinecke (3):
mptfusion: correct definitions for mptscsih_dev_reset()
mptfc: use fc_block_rport() instead of open-coding it
mptfc: iterate over all rports during bus reset

 drivers/message/fusion/mptfc.c    | 96 +++++++++++++++----------------
 drivers/message/fusion/mptscsih.c | 55 +++++++++++++++++-
 drivers/message/fusion/mptscsih.h |  1 +
 3 files changed, 100 insertions(+), 52 deletions(-)
Signature · 1 line
2.29.2