Skip to content

gpio: tegra: add multiple interrupt support

Prathamesh Shete linux-gpio linux-tegra lkml 4 versions – Applied

Status from this message: I've applied this now to the Tegra tree, thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 4 repliesApplied
  2. v2 posting 2/20 of 2 patches 0 repliesSuperseded
  3. v2 posting 1/22 patches 2 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v11 patch0 repliesSuperseded

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/2gpio: tegra: add multiple interrupt supportdrivers/gpio/gpio-tegra186.c+22 -51 reply
2/2arm64: tegra: GPIO Interrupt entriesarch/arm64/boot/dts/nvidia/tegra194.dtsi+47 -23 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/2] gpio: tegra: add multiple interrupt support

From: pshete <[email protected]>

These patches adds multiple interrupt support.
Each main GPIO is associated with 8 interrupts per controller in case of NON-AON GPIO's and 4 interrupts per controller in AON GPIO.
This is new feature starting Tegra194
The interrupt route map determines which interrupt line is to be used.

pshete (2):
gpio: tegra: add multiple interrupt support
arm64: tegra: GPIO Interrupt entries

 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 49 +++++++++++++++++++++++-
 drivers/gpio/gpio-tegra186.c             | 27 ++++++++++---
 2 files changed, 69 insertions(+), 7 deletions(-)
Signature · 1 line
2.17.1