Skip to content

arm: zynqmp: add support for zcu106 and boot sources

Michael Riesch barebox 2 versions – Applied

Status from this message: Applied, thanks

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest3 patches 1 replyApplied
  2. v13 patches 4 repliesSuperseded

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/3arm: zynqmp: add support for xilinx zcu106 boardarch/arm/boards/Makefile arch/arm/boards/xilinx-zcu106/Makefile arch/arm/boards/xilinx-zcu106/board.c +6 more+93 -00 replies
2/3Documentation: boards: zynqmp: fix broken linksDocumentation/boards/zynqmp.rst+2 -20 replies
3/3arm: zynqmp: add boot source supportarch/arm/mach-zynqmp/zynqmp.c+86 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources

Hi all,

This series features some mixed additions to and improvements of the Xilinx Zynq UltraScale+ MPSoC support in barebox.

The first patch introduces support for the Xilinx Zynq UltraScale+ MPSoC ZCU106 evaluation board (based on the board support for the ZCU104). Tested the basic features (SD card, Ethernet, ...) on a ZCU106 board (well, obviously...).

The second patch fixes two links in the Zynq UltraScale+ part of the documentation.

Finally, the third patch introduces support for the boot source detection on the Zynq UltraScale+ architecture in general. Tested on the ZCU106 and a custom Zynq UltraScale+ board.

Version 2 of this patch considers the reviews by Michael Tretter and Ahmad Fatoum. Now boot source and instance are set in the zynqmp_init method and the boot source/instance determination has been revised for better readability.

Best regards,
Michael

Michael Riesch (3):
arm: zynqmp: add support for xilinx zcu106 board
Documentation: boards: zynqmp: fix broken links
arm: zynqmp: add boot source support

 Documentation/boards/zynqmp.rst               |  4 +-
 arch/arm/boards/Makefile                      |  1 +
 arch/arm/boards/xilinx-zcu106/Makefile        |  3 +
 arch/arm/boards/xilinx-zcu106/board.c         | 21 +++++
 arch/arm/boards/xilinx-zcu106/lowlevel.c      | 24 ++++++
 arch/arm/boards/xilinx-zcu106/lowlevel_init.S | 12 +++
 arch/arm/dts/Makefile                         |  1 +
 arch/arm/dts/zynqmp-zcu106-revA.dts           | 21 +++++
 arch/arm/mach-zynqmp/Kconfig                  |  6 ++
 arch/arm/mach-zynqmp/zynqmp.c                 | 86 +++++++++++++++++++
 images/Makefile.zynqmp                        |  4 +
 11 files changed, 181 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boards/xilinx-zcu106/Makefile
 create mode 100644 arch/arm/boards/xilinx-zcu106/board.c
 create mode 100644 arch/arm/boards/xilinx-zcu106/lowlevel.c
 create mode 100644 arch/arm/boards/xilinx-zcu106/lowlevel_init.S
 create mode 100644 arch/arm/dts/zynqmp-zcu106-revA.dts
Signature · 7 lines
2.17.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox