RFC virtio-mem: Expose device memory via separate memslots
Get series with b4
b4 am [email protected]Versions newest first
- v1 RFC Latest15 patches 5 repliesIn review
Patches in v1 No applies recorded yet
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH RFC 00/15] virtio-mem: Expose device memory via separate memslots
Based-on: [email protected]
A virtio-mem device is represented by a single large RAM memory region backed by a single large mmap.
Right now, we map that complete memory region into guest physical addres space, resulting in a very large memory mapping, KVM memory slot, ... although only a small amount of memory might actually be exposed to the VM.
For example, when starting a VM with a 1 TiB virtio-mem device that only exposes little device memory (e.g., 1 GiB) towards the VM initialliy, in order to hotplug more memory later, we waste a lot of memory on metadata for KVM memory slots (> 2 GiB!) and accompanied bitmaps. Although some optimizations in KVM are being worked on to reduce this metadata overhead on x86-64 in some cases, it remains a problem with nested VMs and there are other reasons why we would want to reduce the total memory slot to a reasonable minimum.
We want to:
a) Reduce the metadata overhead, including bitmap sizes inside KVM but also inside QEMU KVM code where possible.
b) Not always expose all device-memory to the VM, to reduce the attack surface of malicious VMs without using userfaultfd.
So instead, expose the RAM memory region not by a single large mapping (consuming one memslot) but instead by multiple mappings, each consuming one memslot. To do that, we divide the RAM memory region via aliases into separate parts and only map the aliases into a device container we actually need. We have to make sure that QEMU won't silently merge the memory sections corresponding to the aliases (and thereby also memslots), otherwise we lose atomic updates with KVM and vhost-user, which we deeply care about when adding/removing memory. Further, to get memslot accounting right, such merging is better avoided.
Within the memslots, virtio-mem can (un)plug memory in smaller granularity dynamically. So memslots are a pure optimization to tackle a) and b) above.
Memslots are right now mapped once they fall into the usable device region (which grows/shrinks on demand right now either when requesting to
hotplug more memory or during/after reboots). In the future, withVIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, we'll be able to (un)map aliases even more dynamically when (un)plugging device blocks.
Adding a 500GiB virtio-mem device and not hotplugging any memory results in:
0000000140000000-000001047fffffff (prio 0, i/o): device-memory
0000000140000000-0000007e3fffffff (prio 0, i/o): virtio-mem-memslotsRequesting the VM to consume 2 GiB results in (note: the usable region size is bigger than 2 GiB, so 3 * 1 GiB memslots are required):
0000000140000000-000001047fffffff (prio 0, i/o): device-memory
0000000140000000-0000007e3fffffff (prio 0, i/o): virtio-mem-memslots
0000000140000000-000000017fffffff (prio 0, ram): alias virtio-mem-memslot-0 @mem0 0000000000000000-000000003fffffff
0000000180000000-00000001bfffffff (prio 0, ram): alias virtio-mem-memslot-1 @mem0 0000000040000000-000000007fffffff
00000001c0000000-00000001ffffffff (prio 0, ram): alias virtio-mem-memslot-2 @mem0 0000000080000000-00000000bfffffffRequesting the VM to consume 20 GiB results in:
0000000140000000-000001047fffffff (prio 0, i/o): device-memory
0000000140000000-0000007e3fffffff (prio 0, i/o): virtio-mem-memslots
0000000140000000-000000017fffffff (prio 0, ram): alias virtio-mem-memslot-0 @mem0 0000000000000000-000000003fffffff
0000000180000000-00000001bfffffff (prio 0, ram): alias virtio-mem-memslot-1 @mem0 0000000040000000-000000007fffffff
00000001c0000000-00000001ffffffff (prio 0, ram): alias virtio-mem-memslot-2 @mem0 0000000080000000-00000000bfffffff
0000000200000000-000000023fffffff (prio 0, ram): alias virtio-mem-memslot-3 @mem0 00000000c0000000-00000000ffffffff
0000000240000000-000000027fffffff (prio 0, ram): alias virtio-mem-memslot-4 @mem0 0000000100000000-000000013fffffff
0000000280000000-00000002bfffffff (prio 0, ram): alias virtio-mem-memslot-5 @mem0 0000000140000000-000000017fffffff
00000002c0000000-00000002ffffffff (prio 0, ram): alias virtio-mem-memslot-6 @mem0 0000000180000000-00000001bfffffff
0000000300000000-000000033fffffff (prio 0, ram): alias virtio-mem-memslot-7 @mem0 00000001c0000000-00000001ffffffff
0000000340000000-000000037fffffff (prio 0, ram): alias virtio-mem-memslot-8 @mem0 0000000200000000-000000023fffffff
0000000380000000-00000003bfffffff (prio 0, ram): alias virtio-mem-memslot-9 @mem0 0000000240000000-000000027fffffff
00000003c0000000-00000003ffffffff (prio 0, ram): alias virtio-mem-memslot-10 @mem0 0000000280000000-00000002bfffffff
0000000400000000-000000043fffffff (prio 0, ram): alias virtio-mem-memslot-11 @mem0 00000002c0000000-00000002ffffffff
0000000440000000-000000047fffffff (prio 0, ram): alias virtio-mem-memslot-12 @mem0 0000000300000000-000000033fffffff
0000000480000000-00000004bfffffff (prio 0, ram): alias virtio-mem-memslot-13 @mem0 0000000340000000-000000037fffffff
00000004c0000000-00000004ffffffff (prio 0, ram): alias virtio-mem-memslot-14 @mem0 0000000380000000-00000003bfffffff
0000000500000000-000000053fffffff (prio 0, ram): alias virtio-mem-memslot-15 @mem0 00000003c0000000-00000003ffffffff
0000000540000000-000000057fffffff (prio 0, ram): alias virtio-mem-memslot-16 @mem0 0000000400000000-000000043fffffff
0000000580000000-00000005bfffffff (prio 0, ram): alias virtio-mem-memslot-17 @mem0 0000000440000000-000000047fffffff
00000005c0000000-00000005ffffffff (prio 0, ram): alias virtio-mem-memslot-18 @mem0 0000000480000000-00000004bfffffff
0000000600000000-000000063fffffff (prio 0, ram): alias virtio-mem-memslot-19 @mem0 00000004c0000000-00000004ffffffff
0000000640000000-000000067fffffff (prio 0, ram): alias virtio-mem-memslot-20 @mem0 0000000500000000-000000053fffffffRequesting the VM to consume 5 GiB and rebooting (note: usable region size will change during reboots) results in:
0000000140000000-000001047fffffff (prio 0, i/o): device-memory
0000000140000000-0000007e3fffffff (prio 0, i/o): virtio-mem-memslots
0000000140000000-000000017fffffff (prio 0, ram): alias virtio-mem-memslot-0 @mem0 0000000000000000-000000003fffffff
0000000180000000-00000001bfffffff (prio 0, ram): alias virtio-mem-memslot-1 @mem0 0000000040000000-000000007fffffff
00000001c0000000-00000001ffffffff (prio 0, ram): alias virtio-mem-memslot-2 @mem0 0000000080000000-00000000bfffffff
0000000200000000-000000023fffffff (prio 0, ram): alias virtio-mem-memslot-3 @mem0 00000000c0000000-00000000ffffffff
0000000240000000-000000027fffffff (prio 0, ram): alias virtio-mem-memslot-4 @mem0 0000000100000000-000000013fffffff
0000000280000000-00000002bfffffff (prio 0, ram): alias virtio-mem-memslot-5 @mem0 0000000140000000-000000017fffffffIn addition to other factors, we limit the number of memslots to 1024 per devices and the size of one memslot to at least 1 GiB. So only a 1 TiB virtio-mem device could consume 1024 memslots in the "worst" case. To calculate a memslot limit for a device, we use a heuristic based on all available memslots for memory devices and the percentage of "device size":"total memory device area size". Users can further limit the maximum number of memslots that will be used by a device by setting the "max-memslots" property. It's expected to be set to "0" (auto) in most setups.
In recent setups (e.g., KVM with ~32k memslots, vhost-user with ~4k memslots after this series), we'll get the biggest benefit. In special setups (e.g., older KVM, vhost kernel with 64 memslots), we'll get some benefit -- the individual memslots will be bigger.
Future work:
- vhost-user and libvhost-user optimizations for handling more memslots more efficiently.
David Hildenbrand (15):
memory: Drop mapping check from
memory_region_get_ram_discard_manager()
kvm: Return number of free memslots
vhost: Return number of free memslots
memory: Allow for marking memory region aliases unmergeable
vhost: Don't merge unmergeable memory sections
memory-device: Move memory_device_check_addable() directly into
memory_device_pre_plug()
memory-device: Generalize memory_device_used_region_size()
memory-device: Support memory devices that consume a variable number
of memslots
vhost: Respect reserved memslots for memory devices when realizing a
vhost device
virtio-mem: Set the RamDiscardManager for the RAM memory region
earlier
virtio-mem: Fix typo in virito_mem_intersect_memory_section() function
name
virtio-mem: Expose device memory via separate memslots
vhost-user: Increase VHOST_USER_MAX_RAM_SLOTS to 496 with
CONFIG_VIRTIO_MEM
libvhost-user: Increase VHOST_USER_MAX_RAM_SLOTS to 4096
virtio-mem: Set "max-memslots" to 0 (auto) for the 6.2 machine
accel/kvm/kvm-all.c | 24 ++- accel/stubs/kvm-stub.c | 4 +- hw/core/machine.c | 1 + hw/mem/memory-device.c | 167 +++++++++++++++--- hw/virtio/vhost-stub.c | 2 +- hw/virtio/vhost-user.c | 7 +- hw/virtio/vhost.c | 17 +- hw/virtio/virtio-mem-pci.c | 22 +++ hw/virtio/virtio-mem.c | 202 ++++++++++++++++++++-- include/exec/memory.h | 23 +++ include/hw/mem/memory-device.h | 32 ++++ include/hw/virtio/vhost.h | 2 +- include/hw/virtio/virtio-mem.h | 29 +++- include/sysemu/kvm.h | 2 +- softmmu/memory.c | 35 +++- stubs/qmp_memory_device.c | 5 + subprojects/libvhost-user/libvhost-user.h | 7 +- 17 files changed, 499 insertions(+), 82 deletions(-)
Signature · 1 line
2.31.1