Skip to content

leds: Add KTD20xx RGB LEDs driver from Kinetic

Florian Eckert linux-devicetree linux-leds lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 3 repliesIn review
  2. v12 patches 4 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2leds: ktd20xx: Add the KTD20xx family of the RGB LEDs driver from KineticMAINTAINERS drivers/leds/Kconfig drivers/leds/Makefile +1 more+812 -02 replies
2/2dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB driversDocumentation/devicetree/bindings/leds/leds-ktd20xx.yaml MAINTAINERS+124 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] leds: Add KTD20xx RGB LEDs driver from Kinetic

Introduce the KTD2061/58/59/60 RGB LEDs driver. The difference in these parts are the address number on the I2C bus the device is listen on.

All KT20xx device could control up to 12 LEDs. The chip can be operated in two variants.

v2: fix kbuild ci warnings

Florian Eckert (2):
leds: ktd20xx: Add the KTD20xx family of the RGB LEDs driver from
Kinetic
dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers

 .../bindings/leds/leds-ktd20xx.yaml           | 123 +++
 MAINTAINERS                                   |   7 +
 drivers/leds/Kconfig                          |  13 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-ktd20xx.c                   | 792 ++++++++++++++++++
 5 files changed, 936 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml
 create mode 100644 drivers/leds/leds-ktd20xx.c
Signature · 1 line
2.20.1