Skip to content

pci: Use PCIE_ECAM_OFFSET() macro

Pali Rohár u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 7 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4vexpress64: Remove unused macro XR3PCI_ECAM_OFFSETboard/armltd/vexpress64/pcie.c+0 -41 reply
2/4pci: pcie-brcmstb: Use PCIE_ECAM_OFFSET() macrodrivers/pci/pcie_brcmstb.c+1 -62 replies
3/4pci: pcie_iproc: Use PCIE_ECAM_OFFSET() macrodrivers/pci/pcie_iproc.c+3 -141 reply
4/4pci: pci_octeontx: Use PCIE_ECAM_OFFSET() macrodrivers/pci/pci_octeontx.c+20 -412 replies

Reviews trailers per patch

2 of 4 patches have a Reviewed-by or Acked-by.

PatchNicolas Saenz JulienneStefan Roese
1/4
2/4R-b
3/4
4/4R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH u-boot-next 0/4] pci: Use PCIE_ECAM_OFFSET() macro

This patch series replace usage of custom driver functions and macros by PCIE_ECAM_OFFSET() macro provided by U-Boot pci.h header file.

Please properly review these patches as I do not have hardware with these drivers for testing.

Support for PCIE_ECAM_OFFSET() macro is in U-Boot next branch.

Pali Rohár (4):
vexpress64: Remove unused macro XR3PCI_ECAM_OFFSET
pci: pcie-brcmstb: Use PCIE_ECAM_OFFSET() macro
pci: pcie_iproc: Use PCIE_ECAM_OFFSET() macro
pci: pci_octeontx: Use PCIE_ECAM_OFFSET() macro

 board/armltd/vexpress64/pcie.c |  4 ---
 drivers/pci/pci_octeontx.c     | 61 +++++++++++-----------------------
 drivers/pci/pcie_brcmstb.c     |  7 +---
 drivers/pci/pcie_iproc.c       | 17 ++--------
 4 files changed, 24 insertions(+), 65 deletions(-)
Signature · 1 line
2.20.1