Skip to content

Enable BAM-DMUX/WWAN on Qualcomm MSM8916

Stephan Gerhold linux-arm-msm linux-devicetree linux-remoteproc phone-devel 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 0 repliesNew
  2. v12 patches 2 repliesSuperseded

Changes in v2 from the cover letter

- Avoid using of_platform_populate() and create platform device specifically only for "qcom,bam-dmux".

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUXdrivers/remoteproc/qcom_q6v5_mss.c+8 -00 replies
2/2arm64: dts: qcom: msm8916: Add BAM-DMUX for WWAN network interfacesarch/arm64/boot/dts/qcom/msm8916.dtsi+30 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] Enable BAM-DMUX/WWAN on Qualcomm MSM8916

This series enables using mobile Internet/WWAN on devices based on Qualcomm MSM8916. The network driver for that has already landed in Linux 5.17.

The device tree node of BAM-DMUX does not have any own memory resources. It just bundles resources from other hardware blocks. It could be added to the device tree root node, but it logically belongs below the modem remote processor.

To allow adding it there, the qcom_q6v5_mss driver is modified slightly to create a platform device for it.

Changes in v2:
- Avoid using of_platform_populate() and create platform device specifically only for "qcom,bam-dmux".

Stephan Gerhold (2):
remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUX
arm64: dts: qcom: msm8916: Add BAM-DMUX for WWAN network interfaces

 arch/arm64/boot/dts/qcom/msm8916.dtsi | 30 +++++++++++++++++++++++++++
 drivers/remoteproc/qcom_q6v5_mss.c    |  8 +++++++
 2 files changed, 38 insertions(+)
Signature · 1 line
2.35.1