Skip to content

arm64: dts: meson: add support for ac2xx devices

Christian Hewitt linux-amlogic linux-arm-kernel linux-devicetree lkml 3 versions – Applied

Status from this message: Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.18/dt64)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest9 patches 1 replyApplied
  2. v29 patches 4 repliesSuperseded
  3. v1 RFC9 patches 14 repliesSuperseded

Changes in v3 from the cover letter

- Add Robs binding acks (patches 2/5)
- Add Martin/Piotir's Tested-By's (patches 1/3)
- Reorder Tested-By on patch 9
- Correct 'distinguished' typo in patch 5
- Correct typo in series name/subject

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/9arm64: dts: meson: add common SM1 ac2xx dtsiarch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi+300 -00 replies
2/9dt-bindings: arm: amlogic: add X96-AIR bindingsDocumentation/devicetree/bindings/arm/amlogic.yaml+2 -00 replies
3/9arm64: dts: meson: add initial device-trees for X96-AIRarch/arm64/boot/dts/amlogic/Makefile arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts+247 -00 replies
4/9dt-bindings: vendor-prefixes: add cyx prefixDocumentation/devicetree/bindings/vendor-prefixes.yaml+2 -00 replies
5/9dt-bindings: arm: amlogic: add A95XF3-AIR bindingsDocumentation/devicetree/bindings/arm/amlogic.yaml+2 -00 replies
6/9arm64: dts: meson: add initial device-trees for A95XF3-AIRarch/arm64/boot/dts/amlogic/Makefile arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts+239 -00 replies
7/9dt-bindings: vendor-prefixes: add haochuangyi prefixDocumentation/devicetree/bindings/vendor-prefixes.yaml+2 -00 replies
8/9dt-bindings: arm: amlogic: add H96-Max bindingsDocumentation/devicetree/bindings/arm/amlogic.yaml+1 -00 replies
9/9arm64: dts: meson: add initial device-tree for H96-Maxarch/arm64/boot/dts/amlogic/Makefile arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts+146 -00 replies

Reviews trailers per patch

5 of 9 patches have a Reviewed-by or Acked-by.

PatchMartin BlumenstinglRob HerringPiotr OniszczukBenoit Masson
1/9T-b
2/9A-b
3/9T-b T-b
4/9A-b
5/9A-b
6/9
7/9A-b
8/9A-b
9/9T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v3 thread

Cover letter [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices

This series adds support for several popular Amlogic S905X3 (SM1) Android Set-Top Box devices. Like most Android box devices, they ship in variants with multiple RAM, eMMC, WiFi and BT configurations. RAM and eMMC are not something we need to consider to get a working boot, but we do need to get the correct connectivity spec. Broadly speaking we see boxes with Higher and Lower spec connectivity; High spec is Gigabit Ethernet and Faster dual antennna WiFi, and Lower spec is Megabit Ethernet and a single antenna. In some low-end boxes BT is omitted.

As initial distro setup is frequently performed over SSH or an HDMI GUI app it is important for users to pick a device-tree with the correct Ethernet PHY spec else connectivity is impossible. To aid this we append a -gbit suffix to X96-AIR and A95XF3-AIR models using an external Gigabit PHY, while 10/00 models with internal PHY have no suffix.

NB: At the current time the Realtek 8822CS and MT7668 WiFi/BT modules we have seen on 'AIR' devices are not supported in the kernel so these are deliberately omitted. The H96-Max uses a conventional Broadcom module so has more complete support. For now the boxes have simple HDMI audio support; wiring up the Headphone socket will be done at a later date.

Changes since v2 series:
- Add Robs binding acks (patches 2/5)
- Add Martin/Piotir's Tested-By's (patches 1/3)
- Reorder Tested-By on patch 9
- Correct 'distinguished' typo in patch 5
- Correct typo in series name/subject

Changes since RFC(v1) series:
- Add Robs binding acks on patches 4/7/8 (patches 2/5 still need acks)
- Rename and rework patches around -gbit (as requested by Neil)
- Correct 'manufacturer' typo on patch 8
- Rebase against v5.18/dt64 branch

Christian Hewitt (9):
arm64: dts: meson: add common SM1 ac2xx dtsi
dt-bindings: arm: amlogic: add X96-AIR bindings
arm64: dts: meson: add initial device-trees for X96-AIR
dt-bindings: vendor-prefixes: add cyx prefix
dt-bindings: arm: amlogic: add A95XF3-AIR bindings
arm64: dts: meson: add initial device-trees for A95XF3-AIR
dt-bindings: vendor-prefixes: add haochuangyi prefix
dt-bindings: arm: amlogic: add H96-Max bindings
arm64: dts: meson: add initial device-tree for H96-Max

 .../devicetree/bindings/arm/amlogic.yaml      |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm64/boot/dts/amlogic/Makefile          |   5 +
 .../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 129 ++++++++
 .../boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 108 +++++++
 .../boot/dts/amlogic/meson-sm1-ac2xx.dtsi     | 300 ++++++++++++++++++
 .../boot/dts/amlogic/meson-sm1-h96-max.dts    | 145 +++++++++
 .../dts/amlogic/meson-sm1-x96-air-gbit.dts    | 133 ++++++++
 .../boot/dts/amlogic/meson-sm1-x96-air.dts    | 112 +++++++
 9 files changed, 941 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
Signature · 1 line
2.17.1