Skip to content

sunxi: Fix U-Boot proper SPI operation

Andre Przywara u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest7 patches 12 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7sunxi: SPI: fix pinmuxing for Allwinner H6 SoCsdrivers/spi/spi-sunxi.c+2 -10 replies
2/7sunxi: Kconfig: Fix up SPI configurationarch/arm/Kconfig arch/arm/mach-sunxi/Kconfig configs/libretech_all_h3_it_h5_defconfig +5 more+6 -73 replies
3/7env: sunxi: Define location in SPI flashenv/Kconfig+4 -20 replies
4/7sunxi: use boot source for determining environment locationboard/sunxi/board.c+43 -83 replies
5/7env: sunxi: enable ENV_IS_IN_SPI_FLASHenv/Kconfig+1 -00 replies
6/7sunxi: boards: Enable SPI flash support in U-Boot properconfigs/orangepi_pc2_defconfig configs/orangepi_r1_defconfig configs/orangepi_win_defconfig +5 more+14 -00 replies
7/7sunxi: H6: Enable SPI0 in DT when no eMMC is usedarch/arm/mach-sunxi/Kconfig board/sunxi/board.c configs/pine_h64_defconfig+61 -05 replies

Reviews trailers per patch

2 of 7 patches have a Reviewed-by or Acked-by.

PatchAndre PrzywaraJagan Teki
1/7R-b
2/7R-b
3/7
4/7
5/7
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/7] sunxi: Fix U-Boot proper SPI operation

Hi,

despite U-Boot supporting SPI on Allwinner chips and SPI flash in general for a while, it wasn't really working well for many sunxi boards. Booting from SPI is handled by separate SPL code, which works fine, but the "sf" command in U-Boot proper is often just not operational.

This series tries to improve the situation, by:
- cleaning up the SPI Kconfig situation for sunxi (patch 2)
- adding support for environment in SPI flash (patch 3-5)
- trying to enable more boards for U-Boot-proper SPI flash (patch 6)

As an added bonus there is some whacky code to make the SPI flash usable in Linux on H6 boards. Marking this as RFC.

Actually even after this series many boards still miss out, because they are lacking the required "spi0" alias in the DT. We could go with *-u-boot.dtsi fixes for now (as the SoPine does), but even mainline DT support wouldn't help, as we are somewhat stuck with DT updates. But that's a story for another time, let's get this SPI support fixed first.

Cheers,
Andre

Andre Przywara (6):
sunxi: Kconfig: Fix up SPI configuration
env: sunxi: Define location in SPI flash
sunxi: use boot source for determining environment location
env: sunxi: enable ENV_IS_IN_SPI_FLASH
sunxi: boards: Enable SPI flash support in U-Boot proper
sunxi: H6: Enable SPI0 in DT when no eMMC is used

Daniel Wagenknecht (1):
sunxi: SPI: fix pinmuxing for Allwinner H6 SoCs

 arch/arm/Kconfig                         |   2 +
 arch/arm/mach-sunxi/Kconfig              |  13 ++-
 board/sunxi/board.c                      | 101 +++++++++++++++++++++--
 configs/libretech_all_h3_it_h5_defconfig |   2 -
 configs/libretech_all_h5_cc_h5_defconfig |   2 -
 configs/oceanic_5205_5inmfd_defconfig    |   1 +
 configs/orangepi_pc2_defconfig           |   2 +
 configs/orangepi_r1_defconfig            |   2 +
 configs/orangepi_win_defconfig           |   2 +
 configs/orangepi_zero2_defconfig         |   2 +
 configs/orangepi_zero_defconfig          |   2 +
 configs/pine64-lts_defconfig             |   2 +
 configs/pine_h64_defconfig               |   3 +
 configs/pinecube_defconfig               |   2 +
 configs/sopine_baseboard_defconfig       |   1 +
 drivers/spi/spi-sunxi.c                  |   3 +-
 env/Kconfig                              |   7 +-
 17 files changed, 131 insertions(+), 18 deletions(-)
Signature · 1 line
2.25.1