Skip to content

Add Rikomagic MK808 board

Johan Jonker u-boot 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v11 Latest16 patches 1 replyIn review
  2. v1016 patches 5 repliesSuperseded
  3. v916 patches 16 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v815 patches1 replySuperseded
v719 patches2 repliesSuperseded

Changes in v11 from the cover letter

remove defines
update defconfig
align doc examples

Patches in v11 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/16rockchip: rk3066-power: sync power domain dt-binding header from Linuxinclude/dt-bindings/power/rk3066-power.h+22 -00 replies
2/16rockchip: rk3066: add grf header filearch/arm/include/asm/arch-rockchip/grf_rk3066.h+210 -00 replies
3/16rockchip: rk3066: add clock driver for rk3066 socarch/arm/include/asm/arch-rockchip/cru_rk3066.h drivers/clk/rockchip/Makefile drivers/clk/rockchip/clk_rk3066.c+875 -00 replies
4/16rockchip: rk3066: add rk3066 pinctrl driverdrivers/pinctrl/rockchip/Makefile drivers/pinctrl/rockchip/pinctrl-rk3066.c+113 -00 replies
5/16rockchip: rk3066: add sdram driverdrivers/ram/rockchip/Makefile drivers/ram/rockchip/sdram_rk3066.c+893 -00 replies
6/16arm: dts: rockchip: fix rk3xxx-u-boot.dtsiarch/arm/dts/rk3xxx-u-boot.dtsi+4 -40 replies
7/16arm: dts: rockchip: fix include rk3xxx-u-boot.dtsiarch/arm/dts/rk3188-u-boot.dtsi arch/arm/dts/rk3188.dtsi+1 -10 replies
8/16arm: dts: rockchip: add rk3066a.dtsiarch/arm/dts/rk3066a-u-boot.dtsi arch/arm/dts/rk3066a.dtsi+883 -00 replies
9/16arm: dts: rockchip: add rk3066a-mk808.dtsarch/arm/dts/Makefile arch/arm/dts/rk3066a-mk808-u-boot.dtsi arch/arm/dts/rk3066a-mk808.dts+268 -00 replies
10/16rockchip: tools: add rk3066 support to rkcommon.ctools/rkcommon.c+1 -00 replies
11/16rockchip: rk3066: add core supportarch/arm/include/asm/arch-rk3066/boot0.h arch/arm/include/asm/arch-rk3066/gpio.h arch/arm/include/asm/arch-rk3066/timer.h +9 more+274 -00 replies
12/16rockchip: rk3066: add Rikomagic MK808 boardarch/arm/mach-rockchip/rk3066/Kconfig board/rikomagic/mk808/Kconfig board/rikomagic/mk808/MAINTAINERS +2 more+36 -00 replies
13/16rockchip: rk3066: add mk808_defconfigconfigs/mk808_defconfig+102 -00 replies
14/16doc: rockchip: restyle rockchip.rstdoc/board/rockchip/rockchip.rst+89 -510 replies
15/16doc: rockchip: add px30/rk3326 boards and examplesdoc/board/rockchip/rockchip.rst+16 -00 replies
16/16doc: rockchip: add rk3066 Rikomagic MK808doc/board/rockchip/rockchip.rst+108 -00 replies

Reviews trailers per patch

All 16 patches have a Reviewed-by or Acked-by.

PatchKever YangSean Anderson
1/16R-b
2/16R-b
3/16R-b R-b
4/16R-b
5/16R-b
6/16R-b
7/16R-b
8/16R-b
9/16R-b
10/16R-b
11/16R-b
12/16R-b
13/16R-b
14/16R-b
15/16R-b
16/16R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v11 thread

Cover letter [PATCH v11 00/16] Add Rikomagic MK808 board

MK808 is a RK3066-based board with 1 USB host and 1 USB OTG port, HDMI and a micro-SD card slot. It also includes on-board NAND and 1GB of SDRAM.

Changed V11:
remove defines
update defconfig
align doc examples

Changed V10:
add u-boot,spl-fifo-mode property
combine patches core support
restyle doc rockchip.rst
add more px30 doc info
add more rk3066 doc info

Changed V9:
fix TABs and spaces
add led config
enable led gpio
change pinctrl regmap source
disable STIMER
move include

Changed V8:
update clock driver
update grf header file

Changed V7:
add board files
enable boot from SD card
restyle pinctrl driver
restyle sdram driver

===

Boot procedure flow for a Rockchip rk3066 SoC:

1.Read 2K SDRAM initialization image code to internal SRAM 2.Run image code to do SDRAM initialization 3.Transfer boot image code to SDRAM
4.Run boot image code

Supported system boot from the following devices:
Nand Flash
SPI nor Flash
eMMC device
UART interface

If all boot options fail then enter into BootROM mode on the USB OTG port. Unlike later SoC models the rk3066 BootROM doesn't have SDMMC support.

The size of a full U-boot binary is too large for the internal SDRAM memory. Of that 64k size only 32kb sram - 2kb bootrom is available for the first stage.

Similar to the already supported rk3188, the BootROM will attempt to load up the first stage image in two steps: first 1KB to offset 0x800 in the SRAM and
then the remainder to offset 0xc00 in the SRAM.
It always enters at offset 0x804 after a 4 ASCII character "RK30" header.

With CONFIG_TPL_ROCKCHIP_EARLYRETURN_TO_BROM=y this first stage is combined with the U-boot TPL binary (u-boot-tpl.bin).

For rk3066 with NAND flash and U-boot this gives the following stages:

- TPL: init external SDRAM
- SPL: init SDMMC and read U-boot from SD CARD.
- U-boot: read Linux kernel from SD CARD.
- Kernel

Additionally the rk3066 requires everything the BootROM loads to be RC4-encrypted.

===

Boot solution with full U-boot stored on SD CARD:

Compile commands(U-boot):

ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make mk808_defconfig ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make menuconfig ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make all

===

Size of SPL and TPL must be aligned to 2kb.
If bricked and no BootROM mode shows up then connect pin 8 and 9 of the NAND flash with a needle while reconnecting to the USB OTG port to a PC.

===

Show connected devices with:

lsusb

Bus 001 Device 004: ID 2207:300a Fuzhou Rockchip Electronics Company RK3066 in Mask ROM mode

===

Program commands with ./flash.sh:

#!/bin/sh

printf "RK30" > tplspl.bin
dd if=u-boot-tpl.bin >> tplspl.bin
truncate -s %2048 tplspl.bin
truncate -s %2048 u-boot-spl.bin
../tools/boot_merger --verbose config-flash.ini
../tools/upgrade_tool ul ./RK30xxLoader_uboot.bin

===

config-flash.ini:

[CHIP_NAME]
NAME=RK30
[VERSION]
MAJOR=2
MINOR=21
[CODE471_OPTION]
NUM=1
Path1=30_LPDDR2_300MHz_DD.bin
[CODE472_OPTION]
NUM=1
Path1=rk30usbplug.bin
[LOADER_OPTION]
NUM=2
LOADER1=FlashData
LOADER2=FlashBoot
FlashData=tplspl.bin
FlashBoot=u-boot-spl.bin
[OUTPUT]
PATH=RK30xxLoader_uboot.bin

===

Partition Map for MMC device 0 -- Partition Type: EFI
Part Start LBA End LBA Name
1 0x00000040 0x00001f7f "loader1"
2 0x00004000 0x00005fff "loader2"
3 0x00006000 0x00007fff "trust"
4 0x00008000 0x0003ffff "boot"
5 0x00040000 0x00ed7fde "rootfs"

Make sure boot and esp flag are set for boot partition. Loader1 partition is not used by RK3066.

===

Boot partition:

extlinux -- extlinux.conf
zImage
rk3066a-mk808.dtb

===

extlinux.conf:

label kernel
kernel /zImage
fdt /rk3066a-mk808.dtb
append root=LABEL=linuxroot init=/sbin/init rootfstype=ext4 rootwait

===

Program commands (SD CARD with GPT partition):

sudo dd if=u-boot-dtb.img of=/dev/sda seek=16384

===

TODO:
Better program flow/tools
USB
NAND
etc etc

===

Johan Jonker (12):
rockchip: rk3066-power: sync power domain dt-binding header from Linux
arm: dts: rockchip: fix rk3xxx-u-boot.dtsi
arm: dts: rockchip: fix include rk3xxx-u-boot.dtsi
arm: dts: rockchip: add rk3066a.dtsi
arm: dts: rockchip: add rk3066a-mk808.dts
rockchip: tools: add rk3066 support to rkcommon.c
rockchip: rk3066: add core support
rockchip: rk3066: add Rikomagic MK808 board
rockchip: rk3066: add mk808_defconfig
doc: rockchip: restyle rockchip.rst
doc: rockchip: add px30/rk3326 boards and examples
doc: rockchip: add rk3066 Rikomagic MK808

Paweł Jarosz (4):
rockchip: rk3066: add grf header file
rockchip: rk3066: add clock driver for rk3066 soc
rockchip: rk3066: add rk3066 pinctrl driver
rockchip: rk3066: add sdram driver

 arch/arm/dts/Makefile                         |   3 +
 arch/arm/dts/rk3066a-mk808-u-boot.dtsi        |  49 +
 arch/arm/dts/rk3066a-mk808.dts                | 216 +++++
 arch/arm/dts/rk3066a-u-boot.dtsi              |   4 +
 arch/arm/dts/rk3066a.dtsi                     | 879 +++++++++++++++++
 arch/arm/dts/rk3188-u-boot.dtsi               |   1 +
 arch/arm/dts/rk3188.dtsi                      |   1 -
 arch/arm/dts/rk3xxx-u-boot.dtsi               |   8 +-
 arch/arm/include/asm/arch-rk3066/boot0.h      |   8 +
 arch/arm/include/asm/arch-rk3066/gpio.h       |   8 +
 arch/arm/include/asm/arch-rk3066/timer.h      |   6 +
 .../include/asm/arch-rockchip/cru_rk3066.h    | 157 +++
 .../include/asm/arch-rockchip/grf_rk3066.h    | 210 +++++
 arch/arm/mach-rockchip/Kconfig                |  23 +
 arch/arm/mach-rockchip/Makefile               |   1 +
 arch/arm/mach-rockchip/rk3066/Kconfig         |  39 +
 arch/arm/mach-rockchip/rk3066/Makefile        |   5 +
 arch/arm/mach-rockchip/rk3066/clk_rk3066.c    |  33 +
 arch/arm/mach-rockchip/rk3066/rk3066.c        |  49 +
 arch/arm/mach-rockchip/rk3066/syscon_rk3066.c |  55 ++
 board/rikomagic/mk808/Kconfig                 |  15 +
 board/rikomagic/mk808/MAINTAINERS             |   6 +
 board/rikomagic/mk808/Makefile                |   3 +
 board/rikomagic/mk808/mk808.c                 |   3 +
 configs/mk808_defconfig                       | 102 ++
 doc/board/rockchip/rockchip.rst               | 262 ++++-
 drivers/clk/rockchip/Makefile                 |   1 +
 drivers/clk/rockchip/clk_rk3066.c             | 717 ++++++++++++++
 drivers/pinctrl/rockchip/Makefile             |   1 +
 drivers/pinctrl/rockchip/pinctrl-rk3066.c     | 112 +++
 drivers/ram/rockchip/Makefile                 |   1 +
 drivers/ram/rockchip/sdram_rk3066.c           | 892 ++++++++++++++++++
 include/configs/mk808.h                       |   9 +
 include/configs/rk3066_common.h               |  47 +
 include/dt-bindings/power/rk3066-power.h      |  22 +
 tools/rkcommon.c                              |   1 +
 36 files changed, 3894 insertions(+), 55 deletions(-)
 create mode 100644 arch/arm/dts/rk3066a-mk808-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3066a-mk808.dts
 create mode 100644 arch/arm/dts/rk3066a-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3066a.dtsi
 create mode 100644 arch/arm/include/asm/arch-rk3066/boot0.h
 create mode 100644 arch/arm/include/asm/arch-rk3066/gpio.h
 create mode 100644 arch/arm/include/asm/arch-rk3066/timer.h
 create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3066.h
 create mode 100644 arch/arm/include/asm/arch-rockchip/grf_rk3066.h
 create mode 100644 arch/arm/mach-rockchip/rk3066/Kconfig
 create mode 100644 arch/arm/mach-rockchip/rk3066/Makefile
 create mode 100644 arch/arm/mach-rockchip/rk3066/clk_rk3066.c
 create mode 100644 arch/arm/mach-rockchip/rk3066/rk3066.c
 create mode 100644 arch/arm/mach-rockchip/rk3066/syscon_rk3066.c
 create mode 100644 board/rikomagic/mk808/Kconfig
 create mode 100644 board/rikomagic/mk808/MAINTAINERS
 create mode 100644 board/rikomagic/mk808/Makefile
 create mode 100644 board/rikomagic/mk808/mk808.c
 create mode 100644 configs/mk808_defconfig
 create mode 100644 drivers/clk/rockchip/clk_rk3066.c
 create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3066.c
 create mode 100644 drivers/ram/rockchip/sdram_rk3066.c
 create mode 100644 include/configs/mk808.h
 create mode 100644 include/configs/rk3066_common.h
 create mode 100644 include/dt-bindings/power/rk3066-power.h
Signature · 1 line
2.20.1