Skip to content

Fully enable AER

Stefan Roese linux-pci 4 versions – Applied

Status from this message: Applied to pci/err for v5.20, thanks and sorry for the delay.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest3 patches 8 repliesApplied
  2. v32 patches 10 repliesSuperseded
  3. v22 patches 3 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v11 patch2 repliesSuperseded

Patches in v4 Applied

#Subject and filesSizeRepliesApplied
1/3PCI/AER: Call pcie_set_ecrc_checking() for each PCIe devicedrivers/pci/pcie/aer.c+3 -31 reply
2/3PCI/portdrv: Don't disable AER reporting in get_port_device_capability()drivers/pci/pcie/portdrv_core.c+1 -80 replies
3/3PCI/AER: Enable AER on all PCIe devices supporting itdrivers/pci/pcie/aer.c+4 -04 replies

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchPali Rohár
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/3] Fully enable AER

While working on AER support on a ZynqMP based system, which has some PCIe Device connected via a PCIe switch, problems with AER enabling in the Device Control registers of all PCIe devices but the Root Port. In fact, only the Root Port has AER enabled right now. This patch set now fixes this problem by first fixing the AER enabing in the interconnected PCIe switches between the Root Port and the PCIe devices and in a 2nd patch, also enabling AER in the PCIe Endpoints.

Please note that these changes are quite invasive, as with these patches applied, AER now will be enabled in the Device Control registers of all available PCIe Endpoints, which currently is not the case.

Cc Rafael J. Wysocki <[email protected]>
Cc Bjorn Helgaas <[email protected]>
Cc Pali Rohár <[email protected]>
Cc Bharat Kumar Gogada <[email protected]>
Cc Michal Simek <[email protected]>
Cc Yao Hongbo <[email protected]>
Cc Naveen Naidu <[email protected]>

Stefan Roese (3):
PCI/AER: Call pcie_set_ecrc_checking() for each PCIe device PCI/portdrv: Don't disable AER reporting in
get_port_device_capability()
PCI/AER: Enable AER on all PCIe devices supporting it

 drivers/pci/pcie/aer.c          | 10 +++++++---
 drivers/pci/pcie/portdrv_core.c |  9 +--------
 2 files changed, 8 insertions(+), 11 deletions(-)
Signature · 1 line
2.35.0