Fix and improve gpmi nand on mx28
Status from this message: Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | ARM: dts: imx28: reparent gpmi clock to ref_gpmiarch/ | +2 | 0 replies | |
| 2/4 | mtd: rawnand: gpmi: fix controller timings settingdrivers/ | +3 | 1 reply | |
| 3/4 | mtd: rawnand: gpmi: validate controller clock ratedrivers/ | +18 | 1 reply | |
| 4/4 | mtd: rawnand: gpmi: support fast edo timings for mx28drivers/ | +2 | 1 reply |
Reviews trailers per patch
All 4 patches have a Reviewed-by or Acked-by.
| Patch | Sascha Hauer |
|---|---|
| 1/4 | T-b R-b |
| 2/4 | T-b R-b |
| 3/4 | T-b R-b |
| 4/4 | T-b R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/4] Fix and improve gpmi nand on mx28
Starting from [1], the series fixes the timings setting of the gpmi controller for the mx28 architecture, also adding support for fast edo mode timings. The whole series has been heavily tested with the mtd kernel test modules, and with repeated write cycles on nand.
The whole series has been tested and reviewed by Sascha Hauer <[email protected]>, so I removed the RFC prefix and re-submitted it as a regular patch
set by adding the 'Tested-by' and 'Review-by' tags to every single patch.
[1] https://lore.kernel.org/r/[email protected]
Dario Binacchi (4):
ARM: dts: imx28: reparent gpmi clock to ref_gpmi
mtd: rawnand: gpmi: fix controller timings setting
mtd: rawnand: gpmi: validate controller clock rate
mtd: rawnand: gpmi: support fast edo timings for mx28
arch/arm/boot/dts/imx28.dtsi | 2 ++ drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 27 ++++++++++++++++++---- 2 files changed, 24 insertions(+), 5 deletions(-)
Signature · 1 line
2.32.0