Skip to content

regulator: rpi-panel: Support official Raspberry Pi 7 inches touchscreen

Detlev Casanova lkml 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest9 patches 1 replyIn review
  2. v29 patches 5 repliesSuperseded
  3. v19 patches 0 repliesSuperseded

Changes in v3 from the cover letter

* Add Signed-off-bys
* Use the regmap cache

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9regulator: rpi-panel: Register with a unique backlight namedrivers/regulator/rpi-panel-attiny-regulator.c+1 -20 replies
2/9regulator: rpi-panel: Handle I2C errors/timing to the Atmeldrivers/regulator/rpi-panel-attiny-regulator.c+46 -100 replies
3/9regulator: rpi-panel: Serialise operations.drivers/regulator/rpi-panel-attiny-regulator.c+80 -110 replies
4/9regulator: rpi-panel: Ensure the backlight is off during probe.drivers/regulator/rpi-panel-attiny-regulator.c+1 -00 replies
5/9regulator: rpi-panel: Convert to drive lines directlydrivers/regulator/rpi-panel-attiny-regulator.c+60 -510 replies
6/9regulator: rpi-panel: Add GPIO control for panel and touch resetsdrivers/regulator/Kconfig drivers/regulator/rpi-panel-attiny-regulator.c+98 -180 replies
7/9regulator: rpi-panel: Remove get_brightness hookdrivers/regulator/rpi-panel-attiny-regulator.c+0 -230 replies
8/9regulator/rpi-panel-attiny: Use the regmap cachedrivers/regulator/rpi-panel-attiny-regulator.c+1 -10 replies
9/9regulator/rpi-panel-attiny: Use two transactions for I2C readdrivers/regulator/rpi-panel-attiny-regulator.c+34 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/9] regulator: rpi-panel: Support official Raspberry Pi 7 inches touchscreen

This patchset provides different fixes to the rpi-panel-attiny-regulator driver.

This is a preparation patchset for supporting the official Raspberry Pi 7 inches touchscreen.

It has been tested with a Raspberry Pi 4 B and the official Raspberry Pi 7 inches touchscreen.

Changes in v2:
* Add a dependency on OF_GPIO for GPIO controlled resets

Changes in v3:
* Add Signed-off-bys
* Use the regmap cache

Dave Stevenson (9):
regulator: rpi-panel: Register with a unique backlight name
regulator: rpi-panel: Handle I2C errors/timing to the Atmel
regulator: rpi-panel: Serialise operations.
regulator: rpi-panel: Ensure the backlight is off during probe.
regulator: rpi-panel: Convert to drive lines directly
regulator: rpi-panel: Add GPIO control for panel and touch resets
regulator: rpi-panel: Remove get_brightness hook regulator/rpi-panel-attiny: Use the regmap cache regulator/rpi-panel-attiny: Use two transactions for I2C read

 drivers/regulator/Kconfig                     |   1 +
 .../regulator/rpi-panel-attiny-regulator.c    | 291 +++++++++++++++---
 2 files changed, 248 insertions(+), 44 deletions(-)
Signature · 1 line
2.34.1