Skip to content

sunxi: H6/H616: PRCM updates

Jernej Skrabec linux-sunxi u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3sunxi: prcm: Add a few registersarch/arm/include/asm/arch-sunxi/prcm_sun50i.h arch/arm/mach-sunxi/clock_sun50i_h6.c arch/arm/mach-sunxi/dram_sun50i_h6.c +1 more+23 -61 reply
2/3sunxi: clock: H6/H616: Add resistor calibrationarch/arm/mach-sunxi/clock_sun50i_h6.c+7 -20 replies
3/3sunxi: clock: H6: Adjust PLL LDO before clock setuparch/arm/mach-sunxi/clock_sun50i_h6.c+7 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchSamuel Holland
1/3R-b
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] sunxi: H6/H616: PRCM updates

During H616 boot0 blob and H6 boot0 sources analysis, I noticed that SPL doesn't set resistor calibration and PLL LDO on H6. Tests didn't show any observable difference, but nevertheless it's better to mimick boot0 behaviour.

In the process I also added names for few PRCM registers so it's clearer what code does.

Please take a look.

Best regards,
Jernej

Jernej Skrabec (3):
sunxi: prcm: Add a few registers
sunxi: clock: H6/H616: Add resistor calibration
sunxi: clock: H6: Adjust PLL LDO before clock setup

 arch/arm/include/asm/arch-sunxi/prcm_sun50i.h | 10 ++++++++++
 arch/arm/mach-sunxi/clock_sun50i_h6.c         | 20 ++++++++++++++++---
 arch/arm/mach-sunxi/dram_sun50i_h6.c          |  8 +++++---
 arch/arm/mach-sunxi/dram_sun50i_h616.c        |  7 +++++--
 4 files changed, 37 insertions(+), 8 deletions(-)
Signature · 1 line
2.35.1