Skip to content

arm64: dts: qcom: sc7x80: A smattering of misc dts cleanups + herobrine-rev1

Douglas Anderson linux-arm-msm linux-devicetree lkml 2 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest14 patches 29 repliesApplied
  2. v15 patches 8 repliesSuperseded 4 of 5 applied

Changes in v3 from the cover letter

- Removed extra blank lines
- ("Fix sort order of dp_hot_plug_det") new for v3.
- ("Add edp_out port and HPD lines") new for v3.
- ("Move pcie1_clkreq pull / drive str to boards") new for v3.
- ("sc7280-idp: Disable pull from pcie1_clkreq") new for v3.
- ("Remove dp_hot_plug_det pull from SoC dtsi file") new for v3.
- ("Add a blank line in the dp node") new for v3.
- Rebased atop dts cleanup patches.
- Add regulator suffix as per dts cleanup patches.
- Set PCIe bias / pull as per dts cleanup patches.
- Add dp_hot_plug_det pull as per dts cleanup patches.
- Setup SD card same as dts cleanup patches.
- ("sc7280: Add the CPU compatible to the soc@0 node") new for v3.
- ("Remove "qcom,sc7280" from top-level") patch new for v3.

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/14arm64: dts: qcom: sc7180-trogdor: Add "-regulator" suffix to pp3300_hubarch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi+1 -11 reply
2/14arm64: dts: qcom: sc7280-herobrine: Consistently add "-regulator" suffixarch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts+6 -61 reply
3/14arm64: dts: qcom: sc7280: Properly sort sdc pinctrl linesarch/arm64/boot/dts/qcom/sc7280.dtsi+77 -771 reply
4/14arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrlarch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts arch/arm64/boot/dts/qcom/sc7280-idp.dtsi arch/arm64/boot/dts/qcom/sc7280.dtsi+133 -1482 replies
5/14arm64: dts: qcom: sc7280-idp: No need for "input-enable" on sw_ctrlarch/arm64/boot/dts/qcom/sc7280-idp.dtsi+0 -11 reply
6/14arm64: dts: qcom: sc7280: Fix sort order of dp_hot_plug_det / pcie1_clkreq_narch/arm64/boot/dts/qcom/sc7280.dtsi+6 -62 replies
7/14arm64: dts: qcom: sc7280: Add edp_out port and HPD linesarch/arm64/boot/dts/qcom/sc7280.dtsi+13 -02 replies
8/14arm64: dts: qcom: sc7280: Move pcie1_clkreq pull / drive str to boardsarch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts arch/arm64/boot/dts/qcom/sc7280-idp.dtsi arch/arm64/boot/dts/qcom/sc7280.dtsi+10 -22 replies
9/14arm64: dts: qcom: sc7280: Disable pull from pcie1_clkreqarch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts arch/arm64/boot/dts/qcom/sc7280-idp.dtsi+2 -25 replies
10/14arm64: dts: qcom: sc7280: Move dp_hot_plug_det pull from SoC dtsi filearch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts arch/arm64/boot/dts/qcom/sc7280-idp.dtsi arch/arm64/boot/dts/qcom/sc7280.dtsi+8 -12 replies
11/14arm64: dts: qcom: sc7280: Add a blank line in the dp nodearch/arm64/boot/dts/qcom/sc7280.dtsi+1 -02 replies
12/14arm64: dts: qcom: sc7280: Add herobrine-r1arch/arm64/boot/dts/qcom/Makefile arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +2 more+1647 -23 replies
13/14arm64: dts: qcom: sc7280: Add the CPU compatible to the soc@0 nodearch/arm64/boot/dts/qcom/sc7280.dtsi+1 -13 replies
14/14arm64: dts: qcom: sc7280: Remove "qcom,sc7280" from top-level of boardsarch/arm64/boot/dts/qcom/sc7280-crd.dts arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +2 more+5 -51 reply

Reviews trailers per patch

All 14 patches have a Reviewed-by or Acked-by.

PatchMatthias KaehlckeStephen Boyd
1/14R-b R-b
2/14R-b R-b
3/14R-b R-b
4/14R-b R-b
5/14R-b R-b
6/14R-b R-b
7/14R-b R-b
8/14R-b R-b
9/14R-b
10/14R-b R-b
11/14R-b R-b
12/14R-b
13/14R-b
14/14R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 00/14] arm64: dts: qcom: sc7x80: A smattering of misc dts cleanups + herobrine-rev1

This series is "v2" of my "smattering of misc dts cleanups" series plus v3 of the tail end of the series adding herobrine-rev1. I've set the version number to the larger of the two to (I hope) help allevitate confusion.

For the cleanups, there's not a lot holding this series together except that it fixes a smattering of random dts stuff that I noticed recently. There are not a lot of dependencies and some of the patches could be reordered if desired.

Hopefully these look OK and can be applied quickly to avoid conflicts with other work going on.

For herobrine-rev1, it can be noted that it's likely that with the introduction of -rev1 we can drop -rev0 support, but we'll keep it for now (though we won't try to "fit it in" and share code with it). This series is confirmed to boot atop the top of the linux qualcomm tree, commit a5ee6b7720cb ("Merge branches 'arm64-defconfig-for-5.18', 'arm64-for-5.18', 'dts-for-5.18', 'arm64-fixes-for-5.17' and 'dts-fixes-for-5.17' into for-next")

Changes in v3:
- Removed extra blank lines
- ("Fix sort order of dp_hot_plug_det") new for v3.
- ("Add edp_out port and HPD lines") new for v3.
- ("Move pcie1_clkreq pull / drive str to boards") new for v3.
- ("sc7280-idp: Disable pull from pcie1_clkreq") new for v3.
- ("Remove dp_hot_plug_det pull from SoC dtsi file") new for v3.
- ("Add a blank line in the dp node") new for v3.
- Rebased atop dts cleanup patches.
- Add regulator suffix as per dts cleanup patches.
- Set PCIe bias / pull as per dts cleanup patches.
- Add dp_hot_plug_det pull as per dts cleanup patches.
- Setup SD card same as dts cleanup patches.
- ("sc7280: Add the CPU compatible to the soc@0 node") new for v3.
- ("Remove "qcom,sc7280" from top-level") patch new for v3.

Changes in v2:
- Herobrine compatible on one line, not two
- Wording change in comments for components enabled per-board
- Always sort "bias" above "drive-strength" in pinctrl.
- Properly sort "hub_en" pinctrl.
- Two comments moved from multiline to single line.
- Space after "/delete-property/"

Douglas Anderson (14):
arm64: dts: qcom: sc7180-trogdor: Add "-regulator" suffix to

    pp3300_hub

arm64: dts: qcom: sc7280-herobrine: Consistently add "-regulator"
suffix
arm64: dts: qcom: sc7280: Properly sort sdc pinctrl lines
arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl
arm64: dts: qcom: sc7280-idp: No need for "input-enable" on sw_ctrl
arm64: dts: qcom: sc7280: Fix sort order of dp_hot_plug_det /
pcie1_clkreq_n
arm64: dts: qcom: sc7280: Add edp_out port and HPD lines
arm64: dts: qcom: sc7280: Move pcie1_clkreq pull / drive str to boards
arm64: dts: qcom: sc7280: Disable pull from pcie1_clkreq
arm64: dts: qcom: sc7280: Move dp_hot_plug_det pull from SoC dtsi file
arm64: dts: qcom: sc7280: Add a blank line in the dp node
arm64: dts: qcom: sc7280: Add herobrine-r1
arm64: dts: qcom: sc7280: Add the CPU compatible to the soc@0 node
arm64: dts: qcom: sc7280: Remove "qcom,sc7280" from top-level of
boards

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  |   2 +-
 arch/arm64/boot/dts/qcom/sc7280-crd.dts       |   2 +-
 .../qcom/sc7280-herobrine-herobrine-r0.dts    |  97 +--
 .../qcom/sc7280-herobrine-herobrine-r1.dts    | 313 +++++++
 .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 785 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dts       |   2 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi      |  99 +--
 arch/arm64/boot/dts/qcom/sc7280-idp2.dts      |   2 +-
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi    | 547 ++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 182 ++--
 11 files changed, 1845 insertions(+), 187 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
Signature · 1 line
2.35.0.rc2.247.g8bbb082509-goog