Skip to content

Clock changes for TI dts reg and node name issues

Tony Lindgren linux-clk linux-omap 1 version Applied

Status from this message: Applied to clk-next

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 8 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/8clk: ti: Constify clkctrl_namedrivers/clk/ti/clkctrl.c+1 -11 reply
2/8clk: ti: Preserve node in ti_dt_clocks_register()drivers/clk/ti/clk.c+8 -51 reply
3/8clk: ti: Optionally parse IO address from parent clock nodedrivers/clk/ti/clk.c+8 -21 reply
4/8clk: ti: Add ti_find_clock_provider() to use clock-output-namesdrivers/clk/ti/clk.c+41 -21 reply
5/8clk: ti: Use clock-output-names for clkctrldrivers/clk/ti/clkctrl.c+20 -21 reply
6/8clk: ti: Add ti_dt_clk_name() helper to use clock-output-namesdrivers/clk/ti/clk.c drivers/clk/ti/clock.h+20 -11 reply
7/8clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()drivers/clk/ti/apll.c drivers/clk/ti/clockdomain.c drivers/clk/ti/dpll.c +1 more+22 -121 reply
8/8clk: ti: Update component clocks to use ti_dt_clk_name()drivers/clk/ti/autoidle.c drivers/clk/ti/clk-dra7-atl.c drivers/clk/ti/composite.c +5 more+23 -111 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/8] Clock changes for TI dts reg and node name issues

Hi all,

Here are TI clock changes that allow us to update the devicetree files to use clock-output-names instead of non-standard node names for clocks.

The related devicetree binding changes have been sent and are the folloing patches:

[PATCHv2] dt-bindings: clock: Add binding for TI clksel [PATCH 1/3] dt-bindings: omap: Add clock-output-names and #clock-cells

In addition to these changes, also devicetree changes are needed. Some SoCs also need patches to unify the internal clock names. I'll be sending those out separately.

Regards,

Tony

Tony Lindgren (8):
clk: ti: Constify clkctrl_name
clk: ti: Preserve node in ti_dt_clocks_register()
clk: ti: Optionally parse IO address from parent clock node
clk: ti: Add ti_find_clock_provider() to use clock-output-names
clk: ti: Use clock-output-names for clkctrl
clk: ti: Add ti_dt_clk_name() helper to use clock-output-names
clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()
clk: ti: Update component clocks to use ti_dt_clk_name()

 drivers/clk/ti/apll.c         | 13 ++++--
 drivers/clk/ti/autoidle.c     |  2 +-
 drivers/clk/ti/clk-dra7-atl.c |  6 ++-
 drivers/clk/ti/clk.c          | 86 +++++++++++++++++++++++++++++++----
 drivers/clk/ti/clkctrl.c      | 24 ++++++++--
 drivers/clk/ti/clock.h        |  1 +
 drivers/clk/ti/clockdomain.c  |  2 +-
 drivers/clk/ti/composite.c    |  6 ++-
 drivers/clk/ti/divider.c      |  6 ++-
 drivers/clk/ti/dpll.c         |  8 ++--
 drivers/clk/ti/fapll.c        | 11 +++--
 drivers/clk/ti/fixed-factor.c |  2 +-
 drivers/clk/ti/gate.c         |  4 +-
 drivers/clk/ti/interface.c    |  4 +-
 drivers/clk/ti/mux.c          |  4 +-
 15 files changed, 143 insertions(+), 36 deletions(-)
Signature · 1 line
2.35.1