Skip to content

Use clksel and clock-output-names for am3

Tony Lindgren linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4ARM: dts: Add clksel node for am3 ehrpwmarch/arm/boot/dts/am33xx-clocks.dtsi+27 -200 replies
2/4ARM: dts: Add clksel node for am3 gfxarch/arm/boot/dts/am33xx-clocks.dtsi+20 -130 replies
3/4ARM: dts: Add clksel node for am3 clkoutarch/arm/boot/dts/am33xx-clocks.dtsi+27 -200 replies
4/4ARM: dts: Use clock-output-names for am3arch/arm/boot/dts/am33xx-clocks.dtsi+164 -820 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] Use clksel and clock-output-names for am3

Hi,

These changes update am3 to use the clksel binding and clock-output-names. This is to fix the am3 related devicetree warnings.

This series depends on the related clock changes posted as:

[PATCH 0/8] Clock changes for TI dts reg and node name issues

Regards,

Tony

Tony Lindgren (4):
ARM: dts: Add clksel node for am3 ehrpwm
ARM: dts: Add clksel node for am3 gfx
ARM: dts: Add clksel node for am3 clkout
ARM: dts: Use clock-output-names for am3

 arch/arm/boot/dts/am33xx-clocks.dtsi | 373 +++++++++++++++++----------
 1 file changed, 238 insertions(+), 135 deletions(-)
Signature · 1 line
2.35.1