Skip to content

RFC ARM: dts: Support official Raspberry Pi 7inch touchscreen

Detlev Casanova linux-arm-kernel linux-devicetree lkml soc 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 RFC Latest posting 2/23 patches 5 repliesIn review
  2. v2 RFC posting 1/23 patches 1 replySuperseded
  3. v12 patches 5 repliesSuperseded

Changes in v2 from the cover letter

* The device tree in now an overlay
* The i2c demux patch is kept for now to have a working patch set. It has not been merged yet in [1].
* The device tree overlay doesn't use fragments. It is working as is but not enough literature was found to go one way or the other.

[1] https://www.spinics.net/lists/arm-kernel/msg944330.html

Patches in v2 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3ARM: dts: bcm2*: Demux i2c0 with a pinctrlarch/arm/boot/dts/bcm2711-rpi-4-b.dts arch/arm/boot/dts/bcm2711.dtsi arch/arm/boot/dts/bcm2835-rpi.dtsi +2 more+37 -50 replies
2/3of: Add support for -@ when compiling overlaysdrivers/of/Kconfig scripts/Makefile.lib+15 -22 replies
3/3ARM: dto: Add bcm2711-rpi-7-inches-ts.dts overlayarch/arm/boot/dts/Makefile arch/arm/boot/dts/overlays/Makefile arch/arm/boot/dts/overlays/bcm2711-rpi-7-inches-ts.dts +3 more+141 -03 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [RFC PATCH v2 0/3] ARM: dts: Support official Raspberry Pi 7inch touchscreen

Add a devicetree overlay to support the official Raspberry Pi 7inch touchscreen.

This also demuxes the i2c0 controller to support both pinctrls.

Changes in v2:
* The device tree in now an overlay
* The i2c demux patch is kept for now to have a working patch set. It has not been merged yet in [1].
* The device tree overlay doesn't use fragments. It is working as is but not enough literature was found to go one way or the other.

[1] https://www.spinics.net/lists/arm-kernel/msg944330.html

Detlev Casanova (3):
ARM: dts: bcm2*: Demux i2c0 with a pinctrl
of: Add support for -@ when compiling overlays
ARM: dto: Add bcm2711-rpi-7-inches-ts.dts overlay

 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts         |   1 +
 arch/arm/boot/dts/bcm2711.dtsi                |   2 +-
 arch/arm/boot/dts/bcm2835-rpi.dtsi            |   9 +-
 .../boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi    |   4 +
 arch/arm/boot/dts/bcm283x.dtsi                |  26 +++-
 arch/arm/boot/dts/overlays/Makefile           |   3 +
 .../dts/overlays/bcm2711-rpi-7-inches-ts.dts  | 125 ++++++++++++++++++
 arch/arm64/boot/dts/broadcom/Makefile         |   4 +
 .../arm64/boot/dts/broadcom/overlays/Makefile |   3 +
 .../overlays/bcm2711-rpi-7-inches-ts.dts      |   2 +
 drivers/of/Kconfig                            |   8 ++
 scripts/Makefile.lib                          |   9 +-
 13 files changed, 193 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi
 create mode 100644 arch/arm/boot/dts/overlays/Makefile
 create mode 100644 arch/arm/boot/dts/overlays/bcm2711-rpi-7-inches-ts.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/overlays/Makefile
 create mode 100644 arch/arm64/boot/dts/broadcom/overlays/bcm2711-rpi-7-inches-ts.dts
Signature · 1 line
2.36.0