Skip to content

Control VQ support in vDPA

Gautam Dawar kvm lkml netdev virtualization 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/219 patches 10 repliesIn review
  2. v2 RFC posting 1/219 patches 20 repliesSuperseded

Changes in v2 from the cover letter

- Rebased the v1 patch series on vhost branch of MST vhost git repo git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git/log/?h=vhost
- Updates to accommodate vdpa_sim changes from monolithic module in kernel used v1 patch series to current modularized class (net, block) based approach.
- Added new attributes (ngroups and nas) to "vdpasim_dev_attr" and propagated them from vdpa_sim_net to vdpa_sim
- Widened the data-type for "asid" member of vhost_msg_v2 to __u32 to accommodate PASID
- Fixed the buildbot warnings
- Resolved all checkpatch.pl errors and warnings
- Tested both control and datapath with Xilinx Smartnic SN1000 series device using QEMU implementing the Shadow virtqueue and support for VQ groups and ASID available at [1]

Patches in v2 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/19vhost: move the backend feature bits to vhost_types.hinclude/uapi/linux/vhost.h include/uapi/linux/vhost_types.h+5 -50 replies
2/19virtio-vdpa: don't set callback if virtio doesn't need itdrivers/virtio/virtio_vdpa.c+1 -10 replies
3/19vhost-vdpa: passing iotlb to IOMMU mapping helpersdrivers/vhost/vdpa.c+37 -300 replies
4/19vhost-vdpa: switch to use vhost-vdpa specific IOTLBdrivers/vhost/vdpa.c+10 -80 replies
5/19vdpa: introduce virtqueue groupsdrivers/vdpa/alibaba/eni_vdpa.c drivers/vdpa/ifcvf/ifcvf_main.c drivers/vdpa/mlx5/net/mlx5_vnet.c +6 more+41 -100 replies
6/19vdpa: multiple address spaces supportdrivers/vdpa/alibaba/eni_vdpa.c drivers/vdpa/ifcvf/ifcvf_main.c drivers/vdpa/mlx5/net/mlx5_vnet.c +6 more+45 -250 replies
7/19vdpa: introduce config operations for associating ASID to a virtqueue groupinclude/linux/vdpa.h+8 -00 replies
8/19vhost_iotlb: split out IOTLB initializationdrivers/vhost/iotlb.c include/linux/vhost_iotlb.h+20 -50 replies
9/19vhost: support ASID in IOTLB APIdrivers/vhost/vdpa.c drivers/vhost/vhost.c drivers/vhost/vhost.h +1 more+29 -90 replies
10/19vhost-vdpa: introduce asid based IOTLBdrivers/vhost/vdpa.c+72 -250 replies
11/19vhost-vdpa: introduce uAPI to get the number of virtqueue groupsdrivers/vhost/vdpa.c include/uapi/linux/vhost.h+7 -10 replies
12/19vhost-vdpa: introduce uAPI to get the number of address spacesdrivers/vhost/vdpa.c include/uapi/linux/vhost.h+5 -00 replies
13/19vhost-vdpa: uAPI to get virtqueue group iddrivers/vhost/vdpa.c include/uapi/linux/vhost.h+16 -00 replies
14/19vhost-vdpa: introduce uAPI to set group ASIDdrivers/vhost/vdpa.c include/uapi/linux/vhost.h+15 -00 replies
15/19vhost-vdpa: support ASID based IOTLB APIdrivers/vhost/vdpa.c drivers/vhost/vhost.c+91 -203 replies
16/19vdpa_sim: advertise VIRTIO_NET_F_MTUdrivers/vdpa/vdpa_sim/vdpa_sim_net.c+2 -10 replies
17/19vdpa_sim: factor out buffer completion logicdrivers/vdpa/vdpa_sim/vdpa_sim_net.c+18 -150 replies
18/19vdpa_sim: filter destination mac addressdrivers/vdpa/vdpa_sim/vdpa_sim_net.c+31 -180 replies
19/19vdpasim: control virtqueue supportdrivers/vdpa/vdpa_sim/vdpa_sim.c drivers/vdpa/vdpa_sim/vdpa_sim.h drivers/vdpa/vdpa_sim/vdpa_sim_net.c+161 -204 replies

Reviews trailers per patch

None of the 19 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchEugenio Pérez
SeriesR-b
1/19
2/19
3/19
4/19
5/19
6/19
7/19
8/19
9/19
10/19
11/19
12/19
13/19
14/19
15/19
16/19
17/19
18/19
19/19

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 00/19] Control VQ support in vDPA

Hi All:

This series tries to add the support for control virtqueue in vDPA.

Control virtqueue is used by networking device for accepting various commands from the driver. It's a must to support multiqueue and other configurations.

When used by vhost-vDPA bus driver for VM, the control virtqueue should be shadowed via userspace VMM (Qemu) instead of being assigned directly to Guest. This is because Qemu needs to know the device state in order to start and stop device correctly (e.g for Live Migration).

This requies to isolate the memory mapping for control virtqueue presented by vhost-vDPA to prevent guest from accessing it directly.

To achieve this, vDPA introduce two new abstractions:

- address space: identified through address space id (ASID) and a set of memory mapping in maintained
- virtqueue group: the minimal set of virtqueues that must share an address space

Device needs to advertise the following attributes to vDPA:

- the number of address spaces supported in the device
- the number of virtqueue groups supported in the device
- the mappings from a specific virtqueue to its virtqueue groups

The mappings from virtqueue to virtqueue groups is fixed and defined by vDPA device driver. E.g:

- For the device that has hardware ASID support, it can simply advertise a per virtqueue group.
- For the device that does not have hardware ASID support, it can simply advertise a single virtqueue group that contains all virtqueues. Or if it wants a software emulated control virtqueue, it can advertise two virtqueue groups, one is for cvq, another is for the rest virtqueues.

vDPA also allow to change the association between virtqueue group and address space. So in the case of control virtqueue, userspace VMM(Qemu) may use a dedicated address space for the control virtqueue group to isolate the memory mapping.

The vhost/vhost-vDPA is also extend for the userspace to:

- query the number of virtqueue groups and address spaces supported by the device
- query the virtqueue group for a specific virtqueue
- assocaite a virtqueue group with an address space
- send ASID based IOTLB commands

This will help userspace VMM(Qemu) to detect whether the control vq could be supported and isolate memory mappings of control virtqueue from the others.

To demonstrate the usage, vDPA simulator is extended to support setting MAC address via a emulated control virtqueue.

Please review.

Changes since RFC v2:

- Fixed memory leak for asid 0 in vhost_vdpa_remove_as()
- Removed unnecessary NULL check for iotlb in vhost_vdpa_unmap() and changed its return type to void.
- Removed insignificant used_as member field from struct vhost_vdpa.
- Corrected the iommu parameter in call to vringh_set_iotlb() from vdpasim_set_group_asid()
- Fixed build errors with vdpa_sim_net
- Updated alibaba, vdpa_user and virtio_pci vdpa parent drivers to call updated vDPA APIs and ensured successful build
- Tested control (MAC address configuration) and data-path using single virtqueue pair on Xilinx (now AMD) SN1022 SmartNIC device and vdpa_sim_net software device using QEMU release at [1]
- Removed two extra blank lines after set_group_asid() in include/linux/vdpa.h

Changes since v1:

- Rebased the v1 patch series on vhost branch of MST vhost git repo git.kernel.org/pub/scm/linux/kernel/git/mst/vhost.git/log/?h=vhost
- Updates to accommodate vdpa_sim changes from monolithic module in kernel used v1 patch series to current modularized class (net, block) based approach.
- Added new attributes (ngroups and nas) to "vdpasim_dev_attr" and propagated them from vdpa_sim_net to vdpa_sim
- Widened the data-type for "asid" member of vhost_msg_v2 to __u32 to accommodate PASID
- Fixed the buildbot warnings
- Resolved all checkpatch.pl errors and warnings
- Tested both control and datapath with Xilinx Smartnic SN1000 series device using QEMU implementing the Shadow virtqueue and support for VQ groups and ASID available at [1]

Changes since RFC:

- tweak vhost uAPI documentation
- switch to use device specific IOTLB really in patch 4
- tweak the commit log
- fix that ASID in vhost is claimed to be 32 actually but 16bit actually
- fix use after free when using ASID with IOTLB batching requests
- switch to use Stefano's patch for having separated iov
- remove unused "used_as" variable
- fix the iotlb/asid checking in vhost_vdpa_unmap()

[1] Development QEMU release with support for SVQ, VQ groups and ASID:
github.com/eugpermar/qemu/releases/tag/vdpa_sw_live_migration.d%2F asid_groups-v1.d%2F00

Thanks

Gautam Dawar (19):
vhost: move the backend feature bits to vhost_types.h
virtio-vdpa: don't set callback if virtio doesn't need it
vhost-vdpa: passing iotlb to IOMMU mapping helpers
vhost-vdpa: switch to use vhost-vdpa specific IOTLB
vdpa: introduce virtqueue groups
vdpa: multiple address spaces support
vdpa: introduce config operations for associating ASID to a virtqueue
group
vhost_iotlb: split out IOTLB initialization
vhost: support ASID in IOTLB API
vhost-vdpa: introduce asid based IOTLB
vhost-vdpa: introduce uAPI to get the number of virtqueue groups
vhost-vdpa: introduce uAPI to get the number of address spaces
vhost-vdpa: uAPI to get virtqueue group id
vhost-vdpa: introduce uAPI to set group ASID
vhost-vdpa: support ASID based IOTLB API
vdpa_sim: advertise VIRTIO_NET_F_MTU
vdpa_sim: factor out buffer completion logic
vdpa_sim: filter destination mac address
vdpasim: control virtqueue support

 drivers/vdpa/alibaba/eni_vdpa.c      |   2 +-
 drivers/vdpa/ifcvf/ifcvf_main.c      |   8 +-
 drivers/vdpa/mlx5/net/mlx5_vnet.c    |  11 +-
 drivers/vdpa/vdpa.c                  |   5 +
 drivers/vdpa/vdpa_sim/vdpa_sim.c     | 100 ++++++++--
 drivers/vdpa/vdpa_sim/vdpa_sim.h     |   3 +
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 169 +++++++++++++----
 drivers/vdpa/vdpa_user/vduse_dev.c   |   3 +-
 drivers/vdpa/virtio_pci/vp_vdpa.c    |   2 +-
 drivers/vhost/iotlb.c                |  23 ++-
 drivers/vhost/vdpa.c                 | 267 +++++++++++++++++++++------
 drivers/vhost/vhost.c                |  23 ++-
 drivers/vhost/vhost.h                |   4 +-
 drivers/virtio/virtio_vdpa.c         |   2 +-
 include/linux/vdpa.h                 |  44 ++++-
 include/linux/vhost_iotlb.h          |   2 +
 include/uapi/linux/vhost.h           |  26 ++-
 include/uapi/linux/vhost_types.h     |  11 +-
 18 files changed, 563 insertions(+), 142 deletions(-)
Signature · 1 line
2.30.1