Skip to content

enable usb support on rk356x

Peter Geis linux-arm-kernel linux-devicetree linux-rockchip linux-usb lkml 5 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest5 patches 6 repliesApplied
  2. v48 patches 8 repliesSuperseded
  3. v37 patches 10 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v211 patches5 repliesSuperseded
v18 patches9 repliesSuperseded

Changes in v5 from the cover letter

- Rebase on v5.18-rc1
- Drop patches already merged
- Collect acks and tested-by

Patches in v5 Applied

#Subject and filesSizeRepliesApplied
1/5dt-bindings: soc: grf: add rk3566-pipe-grf compatibleDocumentation/devicetree/bindings/soc/rockchip/grf.yaml+1 -00 replies
2/5soc: rockchip: set dwc3 clock for rk3566drivers/soc/rockchip/grf.c+17 -00 replies
3/5arm64: dts: rockchip: add rk356x dwc3 usb3 nodesarch/arm64/boot/dts/rockchip/rk3566.dtsi arch/arm64/boot/dts/rockchip/rk3568.dtsi arch/arm64/boot/dts/rockchip/rk356x.dtsi+54 -15 replies
4/5arm64: dts: rockchip: enable dwc3 on quartz64-aarch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts+37 -00 replies
5/5arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts+46 -00 replies

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchRob HerringFrank Wunderlich
1/5A-b
2/5
3/5T-b
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/5] enable usb support on rk356x

Good Morning,

This is my patch series that I have maintained out of tree until the combophy driver landed.

This has been rebased on v5.18-rc1, several patches in the previous series already landed and have been dropped.

Patch 1 adds the dt bindings for the grf changes necessary. Patch 2 adds support to the grf driver to set the rk3566 otg clock source.
Patch 3 adds the dwc3 nodes to the rk356x device tree includes. Patch 4 enables the dwc3 nodes on the Quartz64 Model A. Patch 5 enables the dwc3 nodes on the rk3568-evb.

Please review and apply.

Very Respectfully,
Peter Geis

Changelog:
v5:
- Rebase on v5.18-rc1
- Drop patches already merged
- Collect acks and tested-by

v4:
- Add SoC specific binding, fall back to core.

v3:
- Drop the dwc-of-simple method in favor of using dwc core.
- Drop all quirks except snps,dis_u2_susphy_quirk, which is necessary to prevent device detection failures in some states.
- Drop the reset-names.

v2:
- Add a dt-bindings fix for grf.yaml
- Unify the reset names.
- Constrain the force usb2 clock dwc3 patch to only supported variants of the ip.
- Change dwc3-of-simple to support of-match-data.
- Drop the PCLK-PIPE clk.
- Rename the usb nodes to be more friendly.
- Add the rk3568-evb enable patch.

Michael Riesch (1):
arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10

Peter Geis (4):
dt-bindings: soc: grf: add rk3566-pipe-grf compatible
soc: rockchip: set dwc3 clock for rk3566
arm64: dts: rockchip: add rk356x dwc3 usb3 nodes
arm64: dts: rockchip: enable dwc3 on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  1 +
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 11 +++++
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 46 +++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 35 +++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 7 files changed, 155 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1