Skip to content

Add support for LAN937x T1 Phy Driver

Arun Ramadoss lkml netdev 1 version Applied

Status from this message: This series was applied to netdev/net-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 3 repliesApplied 6/6

Patches in v1 All 6 applied

#Subject and filesSizeRepliesApplied
1/6net: phy: used genphy_soft_reset for phy reset in LAN87xxdrivers/net/phy/microchip_t1.c+2 -120 repliesApplied
2/6net: phy: used the PHY_ID_MATCH_MODEL macro for LAN87XXdrivers/net/phy/microchip_t1.c+4 -30 repliesApplied
3/6net: phy: removed empty lines in LAN87XXdrivers/net/phy/microchip_t1.c+0 -40 repliesApplied
4/6net: phy: updated the initialization routine for LAN87xxdrivers/net/phy/microchip_t1.c+175 -420 repliesApplied
5/6net: phy: added the LAN937x phy supportdrivers/net/phy/microchip_t1.c+54 -10 repliesApplied
6/6net: phy: added ethtool master-slave configuration supportdrivers/net/phy/microchip_t1.c+90 -03 repliesApplied

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net-next 0/6] Add support for LAN937x T1 Phy Driver

LAN937x is a Multi-port 100Base-T1 Switch and it internally uses LAN87xx T1 Phy. This series of patch update the initialization routine for the LAN87xx phy and also add LAN937x part support. Added the T1 Phy master-slave configuration through ethtool.

Arun Ramadoss (6):
net: phy: used genphy_soft_reset for phy reset in LAN87xx
net: phy: used the PHY_ID_MATCH_MODEL macro for LAN87XX
net: phy: removed empty lines in LAN87XX
net: phy: updated the initialization routine for LAN87xx
net: phy: added the LAN937x phy support
net: phy: added ethtool master-slave configuration support

 drivers/net/phy/microchip_t1.c | 387 +++++++++++++++++++++++++++------
 1 file changed, 325 insertions(+), 62 deletions(-)

base-commit: f9f52c3474282a5485b28cf188b47d6e2efee185

Signature · 1 line
2.33.0