Skip to content

arm64: dts: Marvell CN9130-CRB fixes

Joachim Wiberg linux-arm-kernel linux-devicetree 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: dts: enable 2.5 Gbps port on CN9130-CRBarch/arm64/boot/dts/marvell/cn9130-crb.dtsi+2 -10 replies
2/2arm64: dts: power on CN9130-CRB USB port on plug-inarch/arm64/boot/dts/marvell/cn9130-crb.dtsi+3 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] arm64: dts: Marvell CN9130-CRB fixes

Hi,

while testing out the CN9130-CRB in Buildroot we found a few minor issues with the (otherwise great) device tree.

- The 2.5 Gbps port did not work
- The USB port did not register plugged in devices

The following patches address these issues.

Best regards
/Joachim

Joachim Wiberg (2):
arm64: dts: enable 2.5 Gbps port on CN9130-CRB
arm64: dts: power on CN9130-CRB USB port on plug-in

 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
Signature · 1 line
2.25.1