Skip to content

Add reset deassertion for Aspeed MDIO

Dylan Hung linux-arm-kernel linux-aspeed linux-devicetree lkml netdev 8 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest3 patches 0 repliesApplied 3/3
  2. v5 posting 2/23 patches 3 repliesSuperseded
  3. v5 posting 1/23 patches 1 replySuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v43 patches4 repliesSuperseded
v3 posting 2/23 patches4 repliesSuperseded
v3 posting 1/23 patches4 repliesSuperseded
v23 patches12 repliesSuperseded
v12 patches5 repliesSuperseded

Changes in v6 from the cover letter

- fix merge conflict for net-next

Patches in v6 All 3 applied

#Subject and filesSizeRepliesApplied
1/3dt-bindings: net: add reset property for aspeed, ast2600-mdio bindingDocumentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml+6 -00 repliesApplied
2/3net: mdio: add reset control for Aspeed MDIOdrivers/net/mdio/mdio-aspeed.c+14 -10 repliesApplied
3/3ARM: dts: aspeed: add reset properties into MDIO nodesarch/arm/boot/dts/aspeed-g6.dtsi+4 -00 repliesApplied

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchKrzysztof KozlowskiAndrew JefferyPhilipp ZabelAndrew Lunn
1/3R-b R-b
2/3R-b R-b R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v6 thread

Cover letter [PATCH net-next v6 0/3] Add reset deassertion for Aspeed MDIO

Add missing reset deassertion for Aspeed MDIO bus controller. The reset is asserted by the hardware when power-on so the driver only needs to deassert it. To be able to work with the old DT blobs, the reset is optional since it may be deasserted by the bootloader or the previous kernel.

V6:
- fix merge conflict for net-next

V5:
- fix error of dt_binding_check

V4:
- use ASPEED_RESET_MII instead of hardcoding in dt-binding example

V3:
- remove reset property from the required list of the device tree bindings
- remove "Cc: stable at vger.kernel.org" from the commit messages
- add more description in the commit message of the dt-binding

V2:
- add reset property in the device tree bindings
- add reset assertion in the error path and driver remove

Dylan Hung (3):
dt-bindings: net: add reset property for aspeed, ast2600-mdio binding
net: mdio: add reset control for Aspeed MDIO
ARM: dts: aspeed: add reset properties into MDIO nodes

 .../bindings/net/aspeed,ast2600-mdio.yaml         |  6 ++++++
 arch/arm/boot/dts/aspeed-g6.dtsi                  |  4 ++++
 drivers/net/mdio/mdio-aspeed.c                    | 15 ++++++++++++++-
 3 files changed, 24 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1