Skip to content

mmc: fsl_esdhc_spl: Fix booting P2020 from SD card

Pali Rohár u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3mmc: fsl_esdhc_spl: pre-PBL: check for BOOT signature instead of MBR/DBRdrivers/mmc/fsl_esdhc_spl.c+25 -21 reply
2/3mmc: fsl_esdhc_spl: pre-PBL: fix determining U-Boot sizedrivers/mmc/fsl_esdhc_spl.c+2 -101 reply
3/3mmc: fsl_esdhc_spl: Call mmc_init() before booting from SD carddrivers/mmc/fsl_esdhc_spl.c+5 -01 reply

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchJaehoon Chung
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] mmc: fsl_esdhc_spl: Fix booting P2020 from SD card

This patch series contains fixes which makes SPL running on P2020 board to load proper U-Boot from SD card with non-default or non-common configuration. Tested on P2020 based board.

Pali Rohár (3):
mmc: fsl_esdhc_spl: pre-PBL: check for BOOT signature instead of
MBR/DBR
mmc: fsl_esdhc_spl: pre-PBL: fix determining U-Boot size
mmc: fsl_esdhc_spl: Call mmc_init() before booting from SD card

 drivers/mmc/fsl_esdhc_spl.c | 44 +++++++++++++++++++++++++++----------
 1 file changed, 32 insertions(+), 12 deletions(-)
Signature · 1 line
2.20.1