Skip to content

powerpc: dts: p2020: Allow to use P2020 DTS files from Linux

Pali Rohár u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2powerpc: dts: p2020: Add fsl/p2020si-pre.dtsi and fsl/p2020si-post.dtsi symlinksarch/powerpc/dts/fsl/p2020si-post.dtsi arch/powerpc/dts/fsl/p2020si-pre.dtsi+2 -00 replies
2/2powerpc: dts: p2020: Add serial0 and serial1 via pq3-duart-0.dtsiarch/powerpc/dts/p2020-post.dtsi arch/powerpc/dts/pq3-duart-0.dtsi+52 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] powerpc: dts: p2020: Allow to use P2020 DTS files from Linux

This patch series imports device tree include files for comaptibility with P2020 device tree files from upstream Linux kernel. So it allows to share same P2020 board device tree files between Linux kernel and U-Boot.

Pali Rohár (2):
powerpc: dts: p2020: Add fsl/p2020si-pre.dtsi and
fsl/p2020si-post.dtsi symlinks
powerpc: dts: p2020: Add serial0 and serial1 via pq3-duart-0.dtsi

 arch/powerpc/dts/fsl/p2020si-post.dtsi |  1 +
 arch/powerpc/dts/fsl/p2020si-pre.dtsi  |  1 +
 arch/powerpc/dts/p2020-post.dtsi       |  1 +
 arch/powerpc/dts/pq3-duart-0.dtsi      | 51 ++++++++++++++++++++++++++
 4 files changed, 54 insertions(+)
 create mode 120000 arch/powerpc/dts/fsl/p2020si-post.dtsi
 create mode 120000 arch/powerpc/dts/fsl/p2020si-pre.dtsi
 create mode 100644 arch/powerpc/dts/pq3-duart-0.dtsi
Signature · 1 line
2.20.1