Skip to content

Use DIV_ROUND_CLOSEST to calculate baud rate,

Yu Tu linux-amlogic linux-arm-kernel linux-serial lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3tty: serial: meson: Use DIV_ROUND_CLOSEST to calculate baud ratesdrivers/tty/serial/meson_uart.c+2 -21 reply
2/3tty: serial: meson: Added 12Mhz as the clock source for calculating baud ratedrivers/tty/serial/meson_uart.c+23 -22 replies
3/3tty: serial: meson: Added S4 SOC compatibilitydrivers/tty/serial/meson_uart.c+4 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchNeil Armstrong
1/3R-b
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] Use DIV_ROUND_CLOSEST to calculate baud rate,

1.Use DIV_ROUND_CLOSEST to calculate baud rates.

2.Added 12Mhz as the clock source for calculating baud rate.

3.Added S4 SOC compatibility.

Yu Tu (3):
tty: serial: meson: Use DIV_ROUND_CLOSEST to calculate baud rates
tty: serial: meson: Added 12Mhz as the clock source for calculating
baud rate
tty: serial: meson: Added S4 SOC compatibility

 drivers/tty/serial/meson_uart.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

base-commit: 3123109284176b1532874591f7c81f3837bbdc17

Signature · 1 line
2.33.1