Skip to content

board: freescale: p1_p2_rdb_pc: Various cleanups and fixes

Pali Rohár u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest11 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/11board: freescale: p1_p2_rdb_pc: Do not hang in checkboard()board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c+1 -10 replies
2/11board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch configurationsboard/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c include/configs/p1_p2_rdb_pc.h+6 -10 replies
3/11board: freescale: p1_p2_rdb_pc: Fix parsing negated upper 4 bits from boot input databoard/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c+4 -08 replies
4/11board: freescale: p1_p2_rdb_pc: Do not set MPC85xx_PMUXCR_SDHC_WP bit when SDHC_WP is used as GPIOboard/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c+4 -20 replies
5/11board: freescale: p1_p2_rdb_pc: Fix page attributes for second 1G SDRAM mapboard/freescale/p1_p2_rdb_pc/tlb.c+3 -30 replies
6/11board: freescale: p1_p2_rdb_pc: Move ifdef for USB/eLBC check to correct placeboard/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c+2 -20 replies
7/11board: freescale: p1_p2_rdb_pc: Fix env $vscfw_addrinclude/configs/p1_p2_rdb_pc.h+6 -20 replies
8/11board: freescale: p1_p2_rdb_pc: Use named macros for i2c bus num and addressinclude/configs/p1_p2_rdb_pc.h+12 -120 replies
9/11board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper NOR banksinclude/configs/p1_p2_rdb_pc.h+11 -20 replies
10/11board: freescale: p1_p2_rdb_pc: Move BootROM change source macros to p1_p2_bootrom.hinclude/configs/p1_p2_bootrom.h include/configs/p1_p2_rdb_pc.h+78 -275 replies
11/11board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defbootinclude/configs/p1_p2_bootrom.h include/configs/p1_p2_rdb_pc.h+51 -07 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/11] board: freescale: p1_p2_rdb_pc: Various cleanups and fixes

This patch series contains various cleanups and fixes for shared P1*/P2* board code and preparation for introducing support for another P2020 board.

Pali Rohár (11):
board: freescale: p1_p2_rdb_pc: Do not hang in checkboard()
board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch
configurations
board: freescale: p1_p2_rdb_pc: Fix parsing negated upper 4 bits from
boot input data
board: freescale: p1_p2_rdb_pc: Do not set MPC85xx_PMUXCR_SDHC_WP bit
when SDHC_WP is used as GPIO
board: freescale: p1_p2_rdb_pc: Fix page attributes for second 1G
SDRAM map
board: freescale: p1_p2_rdb_pc: Move ifdef for USB/eLBC check to
correct place
board: freescale: p1_p2_rdb_pc: Fix env $vscfw_addr
board: freescale: p1_p2_rdb_pc: Use named macros for i2c bus num and
address
board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper
NOR banks
board: freescale: p1_p2_rdb_pc: Move BootROM change source macros to

    p1_p2_bootrom.h

board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot,
norupperboot, sd2boot and defboot

 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c |  20 ++-
 board/freescale/p1_p2_rdb_pc/tlb.c          |   6 +-
 include/configs/p1_p2_bootrom.h             |  46 +++++++
 include/configs/p1_p2_rdb_pc.h              | 130 +++++++++++++++-----
 4 files changed, 164 insertions(+), 38 deletions(-)
 create mode 100644 include/configs/p1_p2_bootrom.h
Signature · 1 line
2.20.1