Skip to content

soc: ti: wkup_m3_ipc: support vtt toggle

Drew Fustini linux-arm-kernel linux-devicetree lkml 2 versions Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 5 repliesApplied
  2. v12 patches 3 repliesSuperseded

Changes in v2 from the cover letter

- Removed unnecessary "ti,needs-vtt-toggle" property

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: wkup-m3-ipc: Add vtt toggle gpio pin propertyDocumentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml+13 -04 replies
2/2soc: ti: wkup_m3_ipc: Add support for toggling VTT regulatordrivers/soc/ti/wkup_m3_ipc.c include/linux/wkup_m3_ipc.h+25 -20 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/2R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] soc: ti: wkup_m3_ipc: support vtt toggle

This series enables the Cortex M3 processor found in AM33xx and AM43xx SoCs to toggle the VTT regulator during low power mode transitions.

I recently converted the Wakeup M3 IPC bindings to YAML. Rob has applied that patch [1]. It is a prerequisite for the wkup-m3-ipc.yaml patch in this series.

[1] https://lore.kernel.org/linux-devicetree/[email protected]/

Changes since v1:
- Removed unnecessary "ti,needs-vtt-toggle" property

Dave Gerlach (1):
soc: ti: wkup_m3_ipc: Add support for toggling VTT regulator

Drew Fustini (1):
dt-bindings: wkup-m3-ipc: Add vtt toggle gpio pin property

 .../bindings/soc/ti/wkup-m3-ipc.yaml          | 13 ++++++++++
 drivers/soc/ti/wkup_m3_ipc.c                  | 26 +++++++++++++++++--
 include/linux/wkup_m3_ipc.h                   |  1 +
 3 files changed, 38 insertions(+), 2 deletions(-)
Signature · 1 line
2.32.0