Skip to content

Add SATA and USB to BPI-R2-Pro board

Frank Wunderlich linux-arm-kernel linux-devicetree linux-rockchip lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: rockchip: Add USB nodes for BPI-R2-Proarch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts+93 -00 replies
2/2arm64: dts: rockchip: Add SATA support to BPI-R2-Proarch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts+9 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Add SATA and USB to BPI-R2-Pro board

From: Frank Wunderlich <[email protected]>

Add necessary nodes for SATA and USB-Support on Bananapi-R2-Pro Board.

it depends on "enable usb support on rk356x" series from Peter Geis

https://patchwork.kernel.org/project/linux-rockchip/list/?series=630470

and a fixup-Patch changing clock names which should be squashed into above series in v6

ref_clk => ref
suspend_clk => suspend
bus_clk => bus_early

Frank Wunderlich (2):
arm64: dts: rockchip: Add USB nodes for BPI-R2-Pro
arm64: dts: rockchip: Add SATA support to BPI-R2-Pro

 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 102 ++++++++++++++++++
 1 file changed, 102 insertions(+)
Signature · 1 line
2.25.1