Skip to content

adin: add support for 125MHz clk-out

Josua Mayer netdev oe-kbuild-all 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 8 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt: adin: document clk-out propertyDocumentation/devicetree/bindings/net/adi,adin.yaml+5 -08 replies
2/3net: phy: adin: add support for 125MHz clk-outdrivers/net/phy/adin.c+30 -00 replies
3/3ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9arch/arm/boot/dts/imx6qdl-sr-som.dtsi+6 -00 replies

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchAndrew LunnKrzysztof Kozlowski
SeriesR-b R-b R-b
1/3
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] adin: add support for 125MHz clk-out

This patch series adds support for enabling a 125MHz reference clock output to the adin 1300 driver.
Finally this clock output is used to add support for SolidRun i.MX6 SoMs revision 1.9 and later, which have replaced the original ethernet phy with an adin 1300.

Josua Mayer (3):
dt: adin: document clk-out property
net: phy: adin: add support for 125MHz clk-out
ARM: dts: imx6qdl-sr-som: update phy configuration for som revision

    1.9
 .../devicetree/bindings/net/adi,adin.yaml     |  5 ++++
 arch/arm/boot/dts/imx6qdl-sr-som.dtsi         |  6 ++++
 drivers/net/phy/adin.c                        | 30 +++++++++++++++++++
 3 files changed, 41 insertions(+)
Signature · 1 line
2.34.1