Skip to content

arm/arm64: dts: Enable device-tree overlay support for RPi devices

Aurelien Jarno linux-arm-kernel linux-devicetree soc 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v1 Latest posting 2/22 patches 5 repliesIn review
  2. v1 posting 1/22 patches 2 repliesSuperseded

Patches in v1 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: dts: broadcom: Enable device-tree overlay support for RPi devicesarch/arm64/boot/dts/broadcom/Makefile+11 -00 replies
2/2arm: dts: Enable device-tree overlay support for RPi devicesarch/arm/boot/dts/Makefile+18 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH RESEND 0/2] arm/arm64: dts: Enable device-tree overlay support for RPi devices

This patchset changes the generation of the Raspberry Pi devices DTB files to improve the support for out-of-tree device-tree overlays, like it has recently been done for the Nvidia SoCs.

I personally only need that for arm64, but I have added a similar patch to do the same on arm.

Aurelien Jarno (2):
arm64: dts: broadcom: Enable device-tree overlay support for RPi
devices
arm: dts: Enable device-tree overlay support for RPi devices

 arch/arm/boot/dts/Makefile            | 18 ++++++++++++++++++
 arch/arm64/boot/dts/broadcom/Makefile | 11 +++++++++++
 2 files changed, 29 insertions(+)
Signature · 1 line
2.35.1