Skip to content

staging/iio: Clean up AD7746 CDC driver and move from staging.

Jonathan Cameron linux-iio 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest17 patches 10 repliesIn review
  2. v217 patches 21 repliesSuperseded
  3. v117 patches 3 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/17iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possibledrivers/iio/industrialio-core.c+23 -81 reply
2/17iio: ABI: Fix wrong format of differential capacitance channel ABI.Documentation/ABI/testing/sysfs-bus-iio+1 -10 replies
3/17staging: iio: cdc: ad7746: Use explicit be24 handling.drivers/staging/iio/cdc/ad7746.c+7 -70 replies
4/17staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace.drivers/staging/iio/cdc/ad7746.c+6 -100 replies
5/17staging: iio: cdc: ad7746: Use local buffer for multi byte reads.drivers/staging/iio/cdc/ad7746.c+3 -60 replies
6/17staging: iio: cdc: ad7746: Factor out ad7746_read_channel()drivers/staging/iio/cdc/ad7746.c+46 -340 replies
7/17staging: iio: cdc: ad7764: Push locking down into case statements in read/write_rawdrivers/staging/iio/cdc/ad7746.c+54 -730 replies
8/17staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etcdrivers/staging/iio/cdc/ad7746.c+99 -532 replies
9/17staging: iio: cdc: ad7746: Drop unused i2c_set_clientdata()drivers/staging/iio/cdc/ad7746.c+0 -20 replies
10/17staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels.drivers/staging/iio/cdc/ad7746.c+8 -150 replies
11/17iio: core: Introduce _zeropoint for differential channelsDocumentation/ABI/testing/sysfs-bus-iio drivers/iio/industrialio-core.c include/linux/iio/types.h+21 -04 replies
12/17staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for differential channels.drivers/staging/iio/cdc/ad7746.c+8 -20 replies
13/17staging: iio: cdc: ad7746: Use read_avail() rather than opencoding.drivers/staging/iio/cdc/ad7746.c+33 -60 replies
14/17staging: iio: ad7746: White space cleanupdrivers/staging/iio/cdc/ad7746.c+7 -100 replies
15/17iio: cdc: ad7746: Add device specific ABI documentation.Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746+11 -01 reply
16/17iio: cdc: ad7746: Move driver out of staging.drivers/iio/cdc/Kconfig drivers/iio/cdc/Makefile drivers/iio/cdc/ad7746.c +5 more+831 -8450 replies
17/17RFC: iio: cdc: ad7746: Add roadtesttools/testing/roadtest/roadtest/tests/iio/cdc/__init__.py tools/testing/roadtest/roadtest/tests/iio/cdc/config tools/testing/roadtest/roadtest/tests/iio/cdc/test_ad7746.py+324 -00 replies

Reviews trailers per patch

None of the 17 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchAndy Shevchenko
SeriesR-b
1/17
2/17
3/17
4/17
5/17
6/17
7/17
8/17
9/17
10/17
11/17
12/17
13/17
14/17
15/17
16/17
17/17

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.

From: Jonathan Cameron <[email protected]>

Changes since v2: Thanks to Andy Shevchenko for review
- Fix the horrible mess I made of a rebase that meant v2 didn't build mid patch set.
- Fix various build issues I'd missed due to wrong make file (fails to update variables after moving them, missing unaligned include, failure to cleanup staging driver Kconfig / Makefile)
- Change new ABI to _zeropoint and add more the description to hopefully add clarify to what this is. I don't think it's going to be a particularly common bit of ABI, but still good to get it right.

Note that the --no-renames was used to preserve full code listing for the actual move out of staging to aid review. The ad7746 file is moved with no changes.

drivers/iio/cdc/ad7746.c renamed from drivers/staging/iio/cdc/ad7746.c +0 -0
similarity index 100%
rename from drivers/staging/iio/cdc/ad7746.c
rename to drivers/iio/cdc/ad7746.c

This started out as an experiment with Vincent Whitchurch's roadtest testing framework [1] and that worked well so I carried on cleaning up the driver. Note that if you are using roadtest rebased to current kernel, add CONFIG_UML_RANDOM as suggested by Vincent in reply to v2 of this series. I still saw one freeze but with that config element added roadtest runs the tests successfully the vast majority of the time.

Mostly this is standard tidy up, move to new interfaces, then move the driver out of staging, but there are a few other things in here.

1) Precision improvement for IIO_VAL_FRACTIONAL_LOG2.
The ad7746 is a 24 bit sensor and this highlighted that 9 decimal places wasn't enough to keep the error introduced by
_raw * _scale from growing too large over the whole range (I couldn't write a sensible test for it). So I've proposed increasing the precision of the calculation used to provide the sysfs attributes with this value type and printing a few more decimal places (12), but only if overflow will not occur due to val[0] > ULLONG_MAX / PICO
2) _zeropoint ABI addition. This driver had an odd use of _offset for the case of differential channels that applied the offset to both of the differential pair (hence userspace shouldn't not apply it when converting to the base units. That isn't inline with the existing documentation for _offset and it wasn't clear to me that it made sense at all. To avoid confusion I've added this new ABI (_zeropoint) for this.
3) roadtest file - note this is not a complete test set for the driver and mainly focused on the main channel reads and places I thought I might have broken things whilst working on the driver. Given roadtest isn't upstream yet this test will have to wait. That doesn't block merging the rest of the series.

My conclusion on roadtest - Very useful indeed. I'd encourage others to consider developing some basic sanity tests for drivers they are working on. Hopefully my python code isn't too hideous to understand at least! Vincent, it might be worth thinking about some generic code to handle the 'variants' on correct ABI like I introduce here because I switched from a shared by type scale to an individual one per channel for the voltages. Both were ABI compliant so that sort of change is fine most of the time though we have to be careful with it.

All comments welcome. Note there may be changes that make more sense to do after moving this out of staging as long as there are no ABI changes involved etc. Feel free to highlight those sorts of changes as well as anything more significant.

[1] https://lore.kernel.org/all/[email protected]/

Jonathan Cameron (17):
iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible
iio: ABI: Fix wrong format of differential capacitance channel ABI.
staging: iio: cdc: ad7746: Use explicit be24 handling.
staging: iio: cdc: ad7746: Push handling of supply voltage scale to
userspace.
staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
staging: iio: cdc: ad7746: Factor out ad7746_read_channel()
staging: iio: cdc: ad7764: Push locking down into case statements in
read/write_raw
staging: iio: cdc: ad7746: Break up use of chan->address and use
FIELD_PREP etc
staging: iio: cdc: ad7746: Drop unused i2c_set_clientdata()
staging: iio: cdc: ad7746: Use _raw and _scale for temperature
channels.
iio: core: Introduce _zeropoint for differential channels
staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for
differential channels.
staging: iio: cdc: ad7746: Use read_avail() rather than opencoding.
staging: iio: ad7746: White space cleanup
iio: cdc: ad7746: Add device specific ABI documentation.
iio: cdc: ad7746: Move driver out of staging.
RFC: iio: cdc: ad7746: Add roadtest

 Documentation/ABI/testing/sysfs-bus-iio       |  21 +-
 .../ABI/testing/sysfs-bus-iio-cdc-ad7746      |  11 +
 drivers/iio/cdc/Kconfig                       |  10 +
 drivers/iio/cdc/Makefile                      |   1 +
 drivers/iio/cdc/ad7746.c                      | 820 ++++++++++++++++++
 drivers/iio/industrialio-core.c               |  32 +-
 drivers/staging/iio/Kconfig                   |   1 -
 drivers/staging/iio/Makefile                  |   1 -
 drivers/staging/iio/cdc/Kconfig               |  17 -
 drivers/staging/iio/cdc/Makefile              |   6 -
 drivers/staging/iio/cdc/ad7746.c              | 767 ----------------
 include/linux/iio/types.h                     |   1 +
 .../roadtest/tests/iio/cdc/__init__.py        |   0
 .../roadtest/roadtest/tests/iio/cdc/config    |   1 +
 .../roadtest/tests/iio/cdc/test_ad7746.py     | 323 +++++++
 15 files changed, 1211 insertions(+), 801 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
 create mode 100644 drivers/iio/cdc/ad7746.c
 delete mode 100644 drivers/staging/iio/cdc/Kconfig
 delete mode 100644 drivers/staging/iio/cdc/Makefile
 delete mode 100644 drivers/staging/iio/cdc/ad7746.c
 create mode 100644 tools/testing/roadtest/roadtest/tests/iio/cdc/__init__.py
 create mode 100644 tools/testing/roadtest/roadtest/tests/iio/cdc/config
 create mode 100644 tools/testing/roadtest/roadtest/tests/iio/cdc/test_ad7746.py
Signature · 1 line
2.36.1