Skip to content

RFC Add MT7531 switch to BPI-R2Pro Board

Frank Wunderlich linux-arm-kernel linux-devicetree linux-mediatek linux-rockchip lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest3 patches 8 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3net: dsa: mt753x: make reset optionaldrivers/net/dsa/mt7530.c+3 -43 replies
2/3net: dsa: mt753x: make CPU-Port dynamicdrivers/net/dsa/mt7530.c drivers/net/dsa/mt7530.h+26 -224 replies
3/3arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro boardarch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts+49 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC v1 0/3] Add MT7531 switch to BPI-R2Pro Board

From: Frank Wunderlich <[email protected]>

The Rockchip-Board Bananapi-R2-Pro has a Mediatek MT7531 connected to the GMAC0.
This series changes DSA driver where needed to work on the Board and adds necessary Devicetree node.

Frank Wunderlich (3):
net: dsa: mt753x: make reset optional
net: dsa: mt753x: make CPU-Port dynamic
arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board

 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 49 +++++++++++++++++
 drivers/net/dsa/mt7530.c                      | 53 ++++++++++---------
 drivers/net/dsa/mt7530.h                      |  2 +-
 3 files changed, 78 insertions(+), 26 deletions(-)
Signature · 1 line
2.25.1