Skip to content

RFC imx8m: Remove manual UART clock initialization

Adam Ford u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest3 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3clk: imx8mm: Add UART clocksdrivers/clk/imx/clk-imx8mm.c+30 -00 replies
2/3serial: mxc: Enable getting and enabling clocks with CCF Compositedrivers/serial/serial_mxc.c include/dm/platform_data/serial_mxc.h+40 -12 replies
3/3imx8: imx8mm_beacon: Remove manual UART clock initializationboard/beacon/imx8mm/spl.c+0 -20 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC 0/3] imx8m: Remove manual UART clock initialization

This series is an RFC focussing on only the i.MX8M Mini until feedback is received when the series can be expanded to other imx boards.

This series adds the UART clocks to the CCF, adds functions to the serial driver to fetch, enable, and query the clock(s), and finally removes the manual clock intialization from SPL.

Once feedback is received and final method is accepted, it can be expanded to other boards.

Adam Ford (3):
clk: imx8mm: Add UART clocks
serial: mxc: Enable getting and enabling clocks with CCF Composite
imx8: imx8mm_beacon: Remove manual UART clock initialization

 board/beacon/imx8mm/spl.c             |  2 --
 drivers/clk/imx/clk-imx8mm.c          | 30 +++++++++++++++++++++
 drivers/serial/serial_mxc.c           | 39 ++++++++++++++++++++++++++-
 include/dm/platform_data/serial_mxc.h |  2 ++
 4 files changed, 70 insertions(+), 3 deletions(-)
Signature · 1 line
2.34.1