Skip to content

adc-joystick: Add polled support

Chris Morgan linux-devicetree linux-input 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: adc-joystick: bindings for adc-joystick-polledDocumentation/devicetree/bindings/input/adc-joystick.yaml+6 -22 replies
2/3Input: adc-joystick - Add polled input device supportdrivers/input/joystick/adc-joystick.c+42 -111 reply
3/3arm64: dts: rockchip: Update joystick to polled for Odroid-Go2arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts+1 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] adc-joystick: Add polled support

From: Chris Morgan <[email protected]>

Add support to the existing adc-joystick driver to support polling rather than relying on triggered buffers. This is useful for devices that do not offer triggered buffers in hardware. Code adapted from changes made by Maya Matuszczyk <[email protected]>.

Chris Morgan (3):
dt-bindings: adc-joystick: bindings for adc-joystick-polled
Input: adc-joystick - Add polled input device support
arm64: dts: rockchip: Update joystick to polled for Odroid-Go2

 .../bindings/input/adc-joystick.yaml          |  8 ++-
 .../boot/dts/rockchip/rk3326-odroid-go2.dts   |  2 +-
 drivers/input/joystick/adc-joystick.c         | 53 +++++++++++++++----
 3 files changed, 49 insertions(+), 14 deletions(-)
Signature · 1 line
2.25.1