Skip to content

Move headers from dt-bindings/clk to clock

Lukas Bulwahn kernel-janitors linux-clk linux-devicetree lkml 1 version Applied

Status from this message: Applied to clk-next

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 6 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: clock: Move lochnagar.h to dt-bindings/clockDocumentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml MAINTAINERS drivers/clk/clk-lochnagar.c +1 more+3 -33 replies
2/2dt-bindings: clock: Move versaclock.h to dt-bindings/clockDocumentation/devicetree/bindings/clock/idt,versaclock5.yaml arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +2 more+5 -53 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchCharles KeepaxLuca CeresoliRob Herring
1/2A-b A-b
2/2R-b R-b A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v1 thread

Cover letter [PATCH 0/2] Move headers from dt-bindings/clk to clock

Michael, Stephen,

I was investigating the state of ownership of the files in include/dt-bindings/ according to the MAINTAINERS file and noticed that there are two directories, clk and clock, that contain the include files for clock drivers mentioned in dt-bindings.

It seems that by mistake, files were added to include/dt-bindings/clk/ instead of include/dt-bindings/clock/ where the majority of files are located.

In the past, others already took care of moving some files from clk to clock in the commit 8e28918a85a0 ("dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock") and commit 35d35aae8177 ("dt-bindings: clock: Move at91.h to dt-bindigs/clock").

This patch series repeats this activity of moving files from clk to clock for the latest state of the kernel repository.

Michael, Stephen, please pick this minor clean-up patches into your common clock tree.

The references that needed to be adapted was identified with git grep; I have not compile-tested these patches and I am relying that the specific compile-test builds for these drivers will detect any potential issues with this refactoring.

Joe, I was also considering to create a rule in checkpatch.pl to check if a patch creates some file in and warn about it. What do you think? You think this is worth a rule in checkpatch? If so, I will create a first RFC patch for such a rule.

Best regards,

Lukas

Lukas Bulwahn (2):
dt-bindings: clock: Move lochnagar.h to dt-bindings/clock
dt-bindings: clock: Move versaclock.h to dt-bindings/clock

 Documentation/devicetree/bindings/clock/idt,versaclock5.yaml | 4 ++--
 Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml  | 2 +-
 MAINTAINERS                                                  | 2 +-
 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi    | 2 +-
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi          | 2 +-
 drivers/clk/clk-lochnagar.c                                  | 2 +-
 drivers/clk/clk-versaclock5.c                                | 2 +-
 include/dt-bindings/{clk => clock}/lochnagar.h               | 0
 include/dt-bindings/{clk => clock}/versaclock.h              | 0
 9 files changed, 8 insertions(+), 8 deletions(-)
 rename include/dt-bindings/{clk => clock}/lochnagar.h (100%)
 rename include/dt-bindings/{clk => clock}/versaclock.h (100%)
Signature · 1 line
2.17.1