Skip to content

phy: ti: phy-j721e-wiz: Add support for j7200-wiz-10g

Roger Quadros linux-devicetree linux-phy lkml 1 version Applied

Status from this message: Applied, thanks

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest7 patches 4 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/7phy: ti: phy-j721e-wiz: Add SGMII support in wiz driver for J7200drivers/phy/ti/phy-j721e-wiz.c+13 -60 replies
2/7dt-bindings: phy: Add PHY_TYPE_USXGMII definitioninclude/dt-bindings/phy/phy.h+1 -01 reply
3/7phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driverdrivers/phy/ti/phy-j721e-wiz.c+50 -10 replies
4/7dt-bindings: phy: ti,phy-j721e-wiz: deprecate clock MUX nodesDocumentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml+3 -01 reply
5/7dt-bindings: phy: ti,phy-j721e-wiz: Add support for ti,j7200-wiz-10gDocumentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml+20 -11 reply
6/7phy: ti: phy-j721e-wiz: add support for j7200-wiz-10gdrivers/phy/ti/phy-j721e-wiz.c+129 -90 replies
7/7phy: ti: phy-j721e-wiz: set PMA_CMN_REFCLK_DIG_DIV based on reflk ratedrivers/phy/ti/phy-j721e-wiz.c+24 -00 replies

Reviews trailers per patch

3 of 7 patches have a Reviewed-by or Acked-by.

PatchRob Herring
1/7
2/7A-b
3/7
4/7A-b
5/7A-b
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/7] phy: ti: phy-j721e-wiz: Add support for j7200-wiz-10g

Hi,

The SERDES in J7200 SR2.0 supports 2 reference clocks. The second reference clock (core_ref1_clk) is hardwired to MAIN_PLL3_HSDIV4_CLKOUT (100/125/156.25 MHz).

Add a new compatible "j7200-wiz-10g" for this device.

The external clocks to SERDES PLL refclock mapping is now controlled by a special register in System Control Module (SCM) space. Add a property "ti,scm" to reference it and configure it in the driver.

cheers,
-roger

Roger Quadros (4):
dt-bindings: phy: ti,phy-j721e-wiz: deprecate clock MUX nodes
dt-bindings: phy: ti,phy-j721e-wiz: Add support for ti,j7200-wiz-10g
phy: ti: phy-j721e-wiz: add support for j7200-wiz-10g
phy: ti: phy-j721e-wiz: set PMA_CMN_REFCLK_DIG_DIV based on reflk rate

Siddharth Vadapalli (1):
phy: ti: phy-j721e-wiz: Add SGMII support in wiz driver for J7200

Swapnil Jakhade (1):
dt-bindings: phy: Add PHY_TYPE_USXGMII definition

Tanmay Patil (1):
phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver

 .../bindings/phy/ti,phy-j721e-wiz.yaml        |  24 +-
 drivers/phy/ti/phy-j721e-wiz.c                | 230 ++++++++++++++++--
 include/dt-bindings/phy/phy.h                 |   1 +
 3 files changed, 239 insertions(+), 16 deletions(-)
Signature · 7 lines
2.17.1


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy