Skip to content

pmic: pca9450: Initialization of pmic like done in linux

Heiko Thiery u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2pmic: pca9450: enable system reset on WDOG_B assertiondrivers/power/pmic/Kconfig drivers/power/pmic/pca9450.c include/power/pca9450.h+26 -02 replies
2/2pmic: pca9450: clear PRESET_EN bit for BUCK1/2/3 voltage settingsdrivers/power/pmic/pca9450.c include/power/pca9450.h+9 -03 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchFabio EstevamFrieder Schrempf
1/2R-b R-b
2/2R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] pmic: pca9450: Initialization of pmic like done in linux

To be able to initialize the PMIC voltages by using the PCA9450 regulator driver we need to properly disable the BUCK1/2/3 preset behavior.

Also the RESET_CTRL/WDOG_B_CFG behavior can be done by the PC9450 PMIC driver.

With that enabled the PMIC custom configurations done in SPL code for boards that has the PCA9450 implemented can be cleaned.

Heiko Thiery (2):
pmic: pca9450: enable system reset on WDOG_B assertion
pmic: pca9450: clear PRESET_EN bit for BUCK1/2/3 voltage settings

 drivers/power/pmic/Kconfig   |  4 ++++
 drivers/power/pmic/pca9450.c | 21 +++++++++++++++++++++
 include/power/pca9450.h      | 10 ++++++++++
 3 files changed, 35 insertions(+)
Signature · 1 line
2.30.2