Skip to content

AM62x ESM support

Julien Panis u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm64: dts: k3-am625-r5: Add support for ESM devicesarch/arm/dts/k3-am625-r5-sk.dts+16 -01 reply
2/3arm64: mach-k3: am625_init: Probe ESM nodesarch/arm/mach-k3/am625_init.c arch/arm/mach-k3/include/mach/am62_hardware.h+26 -01 reply
3/3configs: am62x_evm_r5: Add support for ESMconfigs/am62x_evm_r5_defconfig+3 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/3] AM62x ESM support

[ERRATUM] Patch sent previously with wrong subject prefix. I am sorry.

This patch series adds support for AM62x ESM (Error Signaling Modules).

The Error Signaling Module (ESM) aggregates events and errors from throughout the device into one location. It can signal interrupts to a processor to deal with an event, and manipulate an error pin to signal an external hardware that an error has occurred. Therefore an external controller is able to reset the device. Two ESM can be used : one for main domain devices and another one for MCU domain devices. Event outputs generated by main ESM can be routed to MCU ESM as inputs, and trigger MCU ESM generating its event outputs.

Following are required in defconfig:

	CONFIG_ESM_K3=y
	CONFIG_SPL_MISC=y
	CONFIG_SPL_DRIVERS_MISC=y

Julien Panis (3):
arm64: dts: k3-am625-r5: Add support for ESM devices
arm64: mach-k3: am625_init: Probe ESM nodes
configs: am62x_evm_r5: Add support for ESM

 arch/arm/dts/k3-am625-r5-sk.dts               | 16 +++++++++++++
 arch/arm/mach-k3/am625_init.c                 | 23 +++++++++++++++++++
 arch/arm/mach-k3/include/mach/am62_hardware.h |  3 +++
 configs/am62x_evm_r5_defconfig                |  3 +++
 4 files changed, 45 insertions(+)
Signature · 1 line
2.25.1