PCI: brcmstb: Re-submit reverted patchset
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest7 patches 6 repliesIn review
- v26 patches 22 repliesSuperseded
- v14 patches 20 repliesSuperseded
Patches in v3 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/7 | PCI: brcmstb: Remove unnecessary forward declarationsdrivers/ | +72 | 0 replies | |
| 2/7 | PCI: brcmstb: Split brcm_pcie_setup() into two funcsdrivers/ | +64 | 0 replies | |
| 3/7 | PCI: brcmstb: Gate config space access on link statusdrivers/ | +14 | 0 replies | |
| 4/7 | PCI: brcmstb: Add mechanism to turn on subdev regulatorsdrivers/ | +96 | 0 replies | |
| 5/7 | PCI: brcmstb: Add control of subdevice voltage regulatorsdrivers/ | +95 | 0 replies | |
| 6/7 | PCI: brcmstb: Do not turn off WOL regulators on suspenddrivers/ | +44 | 0 replies | |
| 7/7 | PCI: brcmstb: Have .map_bus function names end with 'map_bus'drivers/ | +4 | 0 replies |
Reviews trailers per patch
None of the 7 patches has a Reviewed-by or Acked-by.
| Patch | Florian Fainelli |
|---|---|
| Series | T-b |
| 1/7 | |
| 2/7 | |
| 3/7 | |
| 4/7 | |
| 5/7 | |
| 6/7 | |
| 7/7 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v3 0/7] PCI: brcmstb: Re-submit reverted patchset
v3 -- Replaced "refusal mode" commit with one that gates config
space accesses based on link status (Bjorn)
-- Restrict the brcm_pcie_start_link() code to only those things
related to link-up and put the rest in brcm_pcie_setup()
-- Added commit to change map functions to end with 'map_bus' (Bjorn) -- s/0x060400/PCI_CLASS_BRIDGE_PCI_NORMAL/ (Pali)
-- Limit config space accesess to 4k window.
-- Remove wording in a commit message that said the regulators
could be endpoint power supplies
V2 -- As v1 included the minimal code to fix a regression. v2 does
the same but adds some improvements suggested by Bjorn.
-- In the unlikely but possible case that some other driver
starts using the port driver's dev_data field, do not overwrite it but issue an error and return.
-- Functions probe() and resume() do similar operations but
did them in a different order; make this order consistent for both.
-- New commit to remove forward declarations.
-- New commit for only the PCIe config-space access "refusal mode". -- brcm_pcie_linkup renamed to brcm_pcie_start_link
-- Add '_noirq' to the brcm_pcie_{suspend,resume} function names
to match the dev_pm_ops names.
-- Changes to commit messages:
o Explain why we are splitting a function in two parts.
o s/RB/Root Port/
NOTE for Bjorn: The two commits "add mechanism .." and "add control ..."
would probably be more clear if they were squashed. They are kept separate as the first one's code may someday be moved under the Port driver. As such, there's some churn.
NOTE for Bjorn: There is no hurry on Broadcom's side wrt which
release cycle/phase this patchset is applied. It goes in when you think it is ready.
V1 -- Resubmission of patchset after original was reverted for a
regression.
A submission [1] was made to enable a PCIe root port to turn on regulators for downstream devices. It was accepted. Months later, a regression was discovered on an RPi CM4 [2]. The patchset was reverted
[3] as the fix came too late in the release cycle. The regression in question is triggered only when the PCIe RC DT node has no root port subnode, which is a perfectly reasonsable configuration.
The original commits are now being resubmitted with some modifications to fix the regression. The modifcations on the original commits are described below (the SHA is that of the original commit):
[830aa6f29f07 PCI: brcmstb: Split brcm_pcie_setup() into two funcs]
NOTE: In the originally submitted patchset, this commit introduced a regression that was corrected by a subsequent commit in the same patchset. Let's not do this again.
@@ -1411,6 +1411,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
if (ret)
goto fail;
+ ret = brcm_pcie_linkup(pcie);
+ if (ret)
+ goto fail;
[67211aadcb4b PCI: brcmstb: Add mechanism to turn on subdev regulators]
NOTE: Not related to the regression, the regulators must be freed whenever the PCIe tree is dismantled:
@@ -507,6 +507,7 @@ static void pci_subdev_regulators_remove_bus(struct pci_bus *bus)
if (regulator_bulk_disable(sr->num_supplies, sr->supplies))
dev_err(dev, "failed to disable regulators for downstream device\n");
+ regulator_bulk_free(sr->num_supplies, sr->supplies);
dev->driver_data = NULL;
[93e41f3fca3d PCI: brcmstb: Add control of subdevice voltage regulators]
NOTE: If the PCIe RC DT node was missing a Root Port subnode, the PCIe link-up was skipped. This is the regression. Fix it by attempting link-up even if the Root Port DT subnode is missing.
@@ -503,11 +503,10 @@ static int pci_subdev_regulators_add_bus(struct pci_bus *bus)
static int brcm_pcie_add_bus(struct pci_bus *bus)
{
- struct device *dev = &bus->dev;
struct brcm_pcie *pcie = (struct brcm_pcie *) bus->sysdata; int ret;
- if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent))
+ if (!bus->parent || !pci_is_root_bus(bus->parent))
return 0;
ret = pci_subdev_regulators_add_bus(bus);
[1] https://lore.kernel.org/r/[email protected]
[2] https://bugzilla.kernel.org/show_bug.cgi?id=215925
[3] https://lore.kernel.org/linux-pci/[email protected]/
Jim Quinlan (7):
PCI: brcmstb: Remove unnecessary forward declarations
PCI: brcmstb: Split brcm_pcie_setup() into two funcs
PCI: brcmstb: Gate config space access on link status
PCI: brcmstb: Add mechanism to turn on subdev regulators
PCI: brcmstb: Add control of subdevice voltage regulators
PCI: brcmstb: Do not turn off WOL regulators on suspend
PCI: brcmstb: Have .map_bus function names end with 'map_bus'
drivers/pci/controller/pcie-brcmstb.c | 476 ++++++++++++++++++-------- 1 file changed, 341 insertions(+), 135 deletions(-)
base-commit: e0dccc3b76fb35bb257b4118367a883073d7390e
Signature · 1 line
2.17.1