Skip to content

clk: qcom: Drop use of pxo/cxo_board for rpm devices

Christian Marangi linux-arm-msm linux-clk linux-devicetree lkml 2 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 4 repliesApplied
  2. v15 patches 18 repliesSuperseded

Changes in v2 from the cover letter

- Add review tag to DTS patch
- Drop clock-output-names patch
- Use pxo/cxo_board clock names
- Remove if nesting from Documentation
- Use min/maxItems in Documentation to describe clocks

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/4dt-bindings: clock: fix wrong clock documentation for qcom,rpmccDocumentation/devicetree/bindings/clock/qcom,rpmcc.yaml+83 -21 reply
2/4ARM: DTS: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660arch/arm/boot/dts/qcom-apq8064.dtsi arch/arm/boot/dts/qcom-ipq8064.dtsi arch/arm/boot/dts/qcom-msm8660.dtsi+7 -10 replies
3/4clk: qcom: clk-rpm: convert to parent_data APIdrivers/clk/qcom/clk-rpm.c+16 -80 replies
4/4clk: qcom: gcc-ipq806x: remove cc_register_board for pxo and cxodrivers/clk/qcom/gcc-ipq806x.c+0 -82 replies

Reviews trailers per patch

2 of 4 patches have a Reviewed-by or Acked-by.

PatchDmitry BaryshkovRob Herring
1/4R-b
2/4R-b
3/4
4/4

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/4] clk: qcom: Drop use of pxo/cxo_board for rpm devices

Trying to convert every driver used by ipq806x to parent_data api, I notice RPM was still using pxo_board clk.

pxo and pxo_board are the same clock and are defined just to handle old clock definition. It was discovered that rpm is the last driver using pxo_board instead of pxo.

While updating the rpm driver I notice the documentation was also wrong, so this series also fix that.

v2:
- Add review tag to DTS patch
- Drop clock-output-names patch
- Use pxo/cxo_board clock names
- Remove if nesting from Documentation
- Use min/maxItems in Documentation to describe clocks

Christian Marangi (4):
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
ARM: DTS: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660
clk: qcom: clk-rpm: convert to parent_data API
clk: qcom: gcc-ipq806x: remove cc_register_board for pxo and cxo

 .../devicetree/bindings/clock/qcom,rpmcc.yaml | 85 ++++++++++++++++++-
 arch/arm/boot/dts/qcom-apq8064.dtsi           |  2 +
 arch/arm/boot/dts/qcom-ipq8064.dtsi           |  2 +
 arch/arm/boot/dts/qcom-msm8660.dtsi           |  4 +-
 drivers/clk/qcom/clk-rpm.c                    | 24 ++++--
 drivers/clk/qcom/gcc-ipq806x.c                |  8 --
 6 files changed, 106 insertions(+), 19 deletions(-)
Signature · 1 line
2.36.1