Skip to content

arm64: j721s2: Add support for additional IPs

Matt Ranostay linux-arm-kernel linux-devicetree lkml 11 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v7 Latest8 patches 9 repliesIn review
  2. v68 patches 6 repliesSuperseded
  3. v58 patches 10 repliesSuperseded
Earlier versions · 8
VersionPostedPatchesRepliesStatus
v4 posting 2/28 patches1 replySuperseded
v4 posting 1/20 of 8 patches0 repliesSuperseded
v39 patches2 repliesSuperseded
v2 posting 2/26 patches0 repliesSuperseded
v2 posting 1/20 of 6 patches0 repliesSuperseded
v1 posting 3/36 patches5 repliesSuperseded
v1 posting 2/30 of 6 patches0 repliesSuperseded
v1 posting 1/36 patches0 repliesSuperseded

Changes in v7 from the cover letter

* Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but requires this series to be merged first
Ref: https://lore.kernel.org/linux-arm-kernel/[email protected]/
* Removed unused pcie1_ep based on feedback
* Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for SPI node to "simple-bus"

Patches in v7 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8arm64: dts: ti: k3-j721s2-main: Add support for USBarch/arm64/boot/dts/ti/k3-j721s2-main.dtsi+42 -01 reply
2/8arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree nodearch/arm64/boot/dts/ti/k3-j721s2-main.dtsi+54 -02 replies
3/8arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPIarch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi+40 -03 replies
4/8arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts+22 -00 replies
5/8arm64: dts: ti: k3-j721s2-common-proc-board: Add USB supportarch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts+22 -00 replies
6/8arm64: dts: ti: k3-j721s2: Add support for OSPI Flashesarch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi+76 -01 reply
7/8arm64: dts: ti: k3-j721s2-main: Add PCIe device tree nodearch/arm64/boot/dts/ti/k3-j721s2-main.dtsi+41 -02 replies
8/8arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIearch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts+7 -00 replies

Reviews trailers per patch

All 8 patches have a Reviewed-by or Acked-by.

PatchRavi GunasekaranSiddharth VadapalliVaishnav Achath
1/8R-b
2/8R-b
3/8R-b
4/8R-b
5/8R-b
6/8R-b
7/8R-b
8/8R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v7 thread

Cover letter [PATCH v7 0/8] arm64: j721s2: Add support for additional IPs

The following series of patches add support for the following on J721S2 common processor board,

- USB
- SerDes
- OSPI
- PCIe

Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value

Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks defines versus entire devicetree nodes. Results in cleaner code that doesn't break dt-schema or the driver functionality.

Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and send it own series to avoid a dependency that would hold up other patches in this series

Changes from v4:
* Add my Signed-off-by lines to all patchsets

Changes from v5:
* Removed Cc from commit messages to reduce clutter
* Squashed changes for device tree nodes that get modified latter in the patchset series

Changes from v6:
* Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but requires this series to be merged first
Ref: https://lore.kernel.org/linux-arm-kernel/[email protected]/
* Removed unused pcie1_ep based on feedback
* Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for SPI node to "simple-bus"

Aswath Govindraju (7):
arm64: dts: ti: k3-j721s2-main: Add support for USB
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe

Matt Ranostay (1):
arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

 .../dts/ti/k3-j721s2-common-proc-board.dts    |  85 +++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 137 ++++++++++++++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  40 +++++
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  42 ++++++
 4 files changed, 304 insertions(+)
Signature · 1 line
2.38.GIT