phy: sun4i-usb: Allwinner D1 Support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest4 patches 4 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfigarch/ drivers/ | +10 | 1 reply | |
| 2/4 | phy: sun4i-usb: Drop use of arch-specific headersdrivers/ | +0 | 1 reply | |
| 3/4 | phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handlingdrivers/ | +14 | 1 reply | |
| 4/4 | phy: sun4i-usb: Add D1 variantdrivers/ | +10 | 1 reply |
Reviews trailers per patch
All 4 patches have a Reviewed-by or Acked-by.
| Patch | Jagan Teki |
|---|---|
| 1/4 | R-b |
| 2/4 | R-b |
| 3/4 | R-b |
| 4/4 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/4] phy: sun4i-usb: Allwinner D1 Support
This series updates the USB PHY driver to support the Allwinner D1, which is a new RISC-V SoC. First it cleans up a couple of things that tie the driver to the existing ARM port, and then it adds the new PHY variant to the driver. Patches 3-4 are effectively the same as changes made to the Linux driver.
After this series, the driver still uses the VBUS and ID pin options from arch/arm/mach-sunxi/Kconfig. Those options will be replaced by devicetree properties in a separate series.
Andre Przywara (1):
phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handling
Samuel Holland (3):
sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig
phy: sun4i-usb: Drop use of arch-specific headers
phy: sun4i-usb: Add D1 variant
arch/arm/mach-sunxi/Kconfig | 9 ------ drivers/phy/allwinner/Kconfig | 10 ++++++ drivers/phy/allwinner/phy-sun4i-usb.c | 44 +++++++++++++++------------ 3 files changed, 34 insertions(+), 29 deletions(-)
Signature · 1 line
2.35.1