Skip to content

RFC net: dsa: bcm_sf2: Utilize PHYLINK for all ports

Florian Fainelli lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest2 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2net: dsa: bcm_sf2: Introduce helper for port override offsetdrivers/net/dsa/bcm_sf2.c+21 -160 replies
2/2net: dsa: bcm_sf2: Have PHYLINK configure CPU/IMP port(s)drivers/net/dsa/bcm_sf2.c+43 -520 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC net-next 0/2] net: dsa: bcm_sf2: Utilize PHYLINK for all ports

Hi all,

Although this should work for all devices, since most DTBs on the platforms where bcm_sf2 is use do not populate a 'fixed-link' property for their CPU ports, but rely on the Ethernet controller DT node doing that, we will not be registering a 'fixed-link' instance for CPU ports.

This still works because the switch matches the configuration of the Ethernet controller, but on BCM4908 where we want to force 2GBits/sec, that I cannot test, not so sure.

So as of now, this series does not produce register for register compatile changes.

Florian Fainelli (2):
net: dsa: bcm_sf2: Introduce helper for port override offset
net: dsa: bcm_sf2: Have PHYLINK configure CPU/IMP port(s)

 drivers/net/dsa/bcm_sf2.c | 130 ++++++++++++++++++--------------------
 1 file changed, 63 insertions(+), 67 deletions(-)
Signature · 1 line
2.25.1